Manual Teka IR 631 (page 15 of 25) (English, German, French)

781067

Zoom out

Zoom in

1/25

level until reaching the maximum value of

P. Using the sensor (4), you can redu-

ce the power level.

For a fast powering up at maximum power:

with the plate at 0, touch the sensor (4)

once. The plate will directly activate at

level 9.

By continuing to press down on any of

these two sensors (4) or (5), they

will repeat the action every half a second,

without needing to press consecutively.

SWITCHING THE HOTPLATES OFF

With the sensor (4), lower the power to

level 0.

The hotplate will automatically power off.

For a fast power up: no matter what the

power level, by simultaneously pressing

the sensors and (5/4), the plate will

immediately power off.

By powering off a hotplate, an Hwill be

shown on the power indicator, if the glass

surface is at a high temperature, indicating

that there a risk of burning. When the tem-

perature has fallen, the indicator will power

off if the top is disconnected or, if it is tur-

ned on, it will indicate a 0.

POWERING OFF THE DEVICE

At any time, you can disconnect the top by

pressing the sensor (1). When doing

this, an acoustic signal is heard and the

power indicators (3) will turn off, except if

there is a residual Hheat indicator active

due to the plate temperature.

Locking the sensors

Using the locking sensor (8), you can

block all the sensors on the touch control

panel. This will make it possible to avoid

undesired accidental operations occurring

or children being able to manipulate the

control.

Bear in mind that with the touch control

powered up, the on/off sensor (1)

makes it possible to turn it off even if the

locking is activated (pilot 10 on). On the

other hand, if the touch control is turned

on, the locking function does not allow for

activating the on/off sensor (1). You

should first deactivate blocking.

To activate or deactivate the function,

simply keep pressing the sensor (8)

for about 1 second. When the function is

active, the pilot light (10) turns on.

Detecting pans

(induction hotplates)

The induction cooking plates incorporate a

container detector. This is to avoid the

plate operating without having a pan on

top or when the container is unsuitable,

e.g., if made of aluminium or another non-

metallic material.

The power indicator blinks if, with the plate

turned on, no container or an inappropria-

te container is detected.

If the containers are removed from the hot-

plate while operating, this will automati-

cally cut off the power supply and the

power indicator will blinks. When putting

the container on the cooking hotplate

again, the power supply restarts at the

power level that was selected.

The time for detecting the container is 3

minutes. If three minutes go by without

having placed a container on the hotplate

or if an inappropriate container is placed

there, the cooking plate deactivates.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Teka IR 631 in the language / languages: English, German, French as an attachment in your email.

The manual is 0.86 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Teka IR 631 Manual

Product: