781077
14
Zoom out
Zoom in
Previous page
1/25
Next page
GB
14
Touch control user
instructions
CONTROL PANEL ELEMENTS(see fig. 3)
On/off sensor.
Hotplate indicators.
Power and/or residual heat indicators.
Reduce power sensor (less).
Increase power sensor (more).
Timer/Clock indicator.
Indicator of selected time (clock).
Locking sensor (for the rest of the sen-
sors, except on/off).
Indicator light of the induction element
with timer.
Pilot light for activated locking.
Time reduction sensor on clock (less).
Time increasing sensor on clock (more).
Countdown indicator (blinks each
second) .
N.B.: * Only visible when in operation.
The sensors marked on the control panel
are used for control purposes.
There is no need to exert pressure on the
glass - you enable the function you requi-
re simply by touching the sensor with your
finger.
Each action is confirmed by a beep.
SWITCHING THE APPLIANCE ON
1Touch the on sensor (1) for at least
one second. The Touch Control will acti-
vate, you will hear a beep and the indi-
cators will turn on. If any of the cooking
areas is hot, the corresponding indicator
will alternate between showing a Hand
a 0.
The following action must be carried out
within 10 seconds or the touch control will
automatically switch off.
When the touch control is activated, it can
be disconnected at any time by touching
the sensor (1), even if it has been
blocked (blocking function activated). The
sensor (1) always takes priority for dis-
connecting the touch control.
SWITCHING THE HOTPLATES ON
The hotplates will be found deactivated,
with their respective power indicators (3)
at 0, until a power level is selected. If all
the hotplates are set at 0, you have 10
seconds to activate any of them, otherwise
the touch control will automatically turn off.
Use the sensors and (4/5) to select
a power level. If you touch the sensor
(5), the plate will switch to level 1and,
for each additional stroke, it will go up one
Use and Maintenance
fig. 3
1
2
3
4
5
8
7
9
10
11
12
6
13
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Teka IR 612 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Teka IR 612 in the language / languages: English, German, French as an attachment in your email.

The manual is 0.86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info