780854
29
Zoom out
Zoom in
Previous page
1/80
Next page
29
User’s Guide
English
IMPORTANT
This function can only be selected when the
oven command functions are set to the rest
position .
Once the door has been locked, you can
start cooking normally.
To activate/deactivate the door lock, follow
these steps:
1. Touch or until the symbol on the
display starts flashing.
The current door lock status will be dis-
played: “On” if it is active and “Off” if deacti-
vated.
2. Press . You will then hear a beep and the
block will start to activate if it was “Off”, or
deactivate if it was “On”.
WARNING
Before locking, ensure that the oven door is
properly closed. If not, it will not lock and an
alarm will sound.
If this happens, switch off the alarm by
pressing any clock button, close the door
properly and lock again as per the instruc-
tions above.
3. Once the door has been fully locked/un-
locked, the display will show the new door
status.
In the event that the locking system is active,
the symbol will appear constantly lit on
the display.
IMPORTANT
To unlock the door during cooking, turn the
function dial to standby and unlock the door
as described above.
Once the door is unlocked, turn the function
dial back to its former position to continue
cooking.
Teka Hydroclean® function
This function makes it easy to remove grease
and other food debris that may have stuck to
the sides of the oven.
For easier cleaning, do not allow dirt to accu-
mulate. Clean the oven frequently.
PROGRAMMING THE TEKA
HYDROCLEAN® FUNCTION®
WARNING
Do not pour water into a hot oven as this can
damage the enamel of the oven.
Always run the cycle on a cold oven. The result
could be affected and the varnish damaged if it
is run when the oven is too hot.
First remove the trays and all accessories from
the oven interior, including the tray supports and
telescopic guide rails. To do this, follow the
instructions in the installation and mainte-
nance guide accompanying the oven.
1. With the oven cold, spread a cloth out on the
bottom of the oven.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Teka HSB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Teka HSB in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 4.98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info