780914

Teka HSB 641 Manual

17
Zoom out
Zoom in
Previous page
1/44
Next page
17
User’s Guide
English
Teka Hydroclean® function
This function makes it easy to remove grease
and other food debris that may have stuck to
the sides of the oven.
For easier cleaning, do not allow dirt to accu-
mulate. Clean the oven frequently.
PROGRAMMING THE TEKA
HYDROCLEAN® FUNCTION
WARNING
Do not pour water into a hot oven as this can
damage the enamel of the oven.
Always run the cycle on a cold oven. The result
could be affected and the varnish damaged if it
is run when the oven is too hot.
First remove the trays and all accessories from
the oven interior, including the tray supports
and telescopic guide rails.
To do this, follow the instructions in the in-
stallation and maintenance guide accom-
panying the oven.
1. With the oven cold, spread a cloth out on
the bottom of the oven.
INFORMATION
For best results, add a teaspoon of mild
washing up detergent to the glass of water
before pouring onto the cloth
3. Turn the control dial to position .
4. Set the temperature to 90º C.
5. Programme a duration of 4 minutes on the
timer.
6. After 4 minutes, an alarm will sound and the
oven will stop heating.
7. Turn the control dial to position .
8. Wait for about 20 minutes for the interior of
the oven to cool.
IMPORTANT
Do not open the oven until the cooling phase
is complete.
This is necessary for the Hydroclean® func-
tion to work properly.
9. Any traces of dirt and excess water can now
be removed from the oven with the damp
cloth.
The Hydroclean® function takes place at a low
temperature. However, cooling times can vary
depending on the room temperature.
WARNING
Before touching the inside surface of the
oven, make sure that it has cooled properly.
If a deeper clean is required after using the Hy-
droclean® function, use neutral detergents and
non-abrasive sponges.
2. Gently pour 200 ml of water into the bottom
of the oven cavity.
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Teka HSB 641 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Teka HSB 641 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 3.48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info