Manual Teka HPE 735 (page 12 of 25) (English, German, French, Portuguese, Spanish)

529594

Zoom out

Zoom in

1/25

ENGLISH

Switch off oven

Conventional

It is used for sponges and cakes where the

heat received must be uniform to achieve a

spongy texture.

Conventional with fan

Appropriate for roasts and cakes. The fan

spreads the heat uniformly inside the oven.

Grill

For preparing dishes with superficial roasting.

It allows the outer layer to be browned without

affecting the inside of the food. Ideal for flat

food, such as steaks, ribs, fish, toast.

MaxiGrill

Allows greater surfaces to be prepared, than

with the grill, together with higher power redu-

cing the time required for browning of the food.

MaxiGrill with fan

Allows uniform roasting at the same time as

surface browning. Ideal for grills. Special for

large volume pieces, such as poultry, game,

etc. It is recommended to put the item on a

rack with a tray beneath to collect the stock

and juices.

Caution

While using the Grill, MaxiGrill or MaxiGrill with

fan, the door must be kept closed.

Turbo

The fan distributes the heat coming from an

element located at the back of the oven. As a

result of the evenly distributed temperature,

food can be cooked on two levels at the same

time.

Lower Element with Turbo

Ideal for baking pizzas, pies, and fruit tarts or

sponges.

Lower element

Heats only from beneath. Suitable for heating

dishes and raising pastry and similar.

Defrosting

This cooking mode is suitable for gently defros-

ting of food. In special food to be consumed

unwarmed, e.g.: cream, custard, pastry, tarts,

cakes, fruit, etc.

Pyrolytic Function

This programme allows you to carry out a

pyrolytic cleaning cycle which involves the oxi-

disation and carbonisation of grease accumu-

lated during cooking, through the high tempe-

ratures that are reached inside the oven.

During the cleaning cycle the light inside the

oven will remain off.

The light remains on through all cooking func-

tions except the pyrolytic function.

Oven Functions Use of the Oven

Setting the time on the Electronic Clock

When the oven is connected to the power sup-

ply, the word and the indication 00:00

flash on the display. Press or to set

the time on the clock. The clock beeps twice

to confirm the selected time.

If you wish to modify the time, press or

until the word and the current time

flash on the screen. Press . Then press

or to modify the time. The clock beeps

twice to confirm the modification.

Manual Operation

The oven is ready to be used when the clock

has been set. Select a cooking function and a

temperature.

When you begin cooking, symbol lights up

gradually until the oven heats up 100% to the

selected temperature.

Set the controls to to turn the oven off.

Symbol gradually goes out as the tem-

perature inside the oven drops.

Functions of the Electronic Clock

Alarm: Creates an alarm signal when the

period of time finishes; the oven does not

need to be in use in order to use this function.

Cooking Time: To cook for a selected length

of time; the oven turns itself off automatically

when the time finishes.

End Cooking Time: To cook until a set time;

the oven turns itself off automatically when

the time finishes.

Cooking time and End Cooking Time: To cook

for a selected length of time and end at a set

time. When this function is set, the oven

comes on automatically at the time required

in order to cook for the set length of time

(Cooking time) and end automatically at the

indicated time (End Cooking Time)

Child Safety Function. This function blocks

the oven to prevent small children from inter-

fering with the controls.

Programming the Pyrolytic function

Programming the Alarm

1 Press until symbol lights up. Press

2 Set the period of time after which you wish

the alarm to sound by pressing or .

3 The clock beeps twice, the current time is

displayed and symbol lights up per-

manently to indicate that the alarm has

been set.

4 When the set period of time comes to an

end, the alarm sounds and symbol

starts to flash.

5 Press any button to stop the alarm; symbol

goes out.

You can consult the remaining time at any

moment by pressing or until symbol

flashes and then pressing . You can

also modify the set time at this point by press-

ing or . The clock beeps twice to con-

firm the change.

If you wish the remaining time to be displayed

until the end of the set period of time, press

or until symbol flashes and then

press and keep it pressed in. Symbol

flashes and the word lights up.

Keep pressed in again to return to the

real time.

Setting the Cooking Time

1 Press or until symbol lights up.

Press .

2 Select the period of time you wish to cook

for by pressing or .

3 The clock beeps twice, the current time is

displayed and symbol lights up perma-

nently to indicate that the oven will turn

itself off automatically.

4 Select a cooking function and temperature.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Teka HPE 735 in the language / languages: English, German, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,61 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Teka HPE 735 Manual

Product: