780848
40
Zoom out
Zoom in
Previous page
1/100
Next page
40 Installation & Maintenance
Deactivate the door lock following the in-
structions in the User’s guide supplied with
this manual.
To continue cooking, re-select the desired
cooking function.
I have turned the control dial to position
and selected a pyrolysis programme
(P1, P2 or P3) but the symbol flashes
quickly and a buzzer sounds
The oven door is not closed properly, so
the door cannot be locked and the pyrolyt-
ic process has been blocked.
Check the door and make sure it is prop-
erly closed. Then set the control dial to the
position and repeat the sequence to ac-
tivate the pyrolysis.
I have turned the control dial to position
and selected a pyrolysis programme
(P1, P2 or P3) but the symbol does
not light up and the oven does not heat
up
The door switch is not working even
though the door is properly closed.
Call the Technical Assistance Service De-
partment as there is a fault in the door
switch.
The pyrolysis programme has ended and
the oven is cold, but the door is locked
and symbol and 0:00 are flashing
You did not turn the control dial to position
when the pyrolysis programme ended.
Set the control dial to position .
The control dial is in position and the
door is still locked
The oven has not cooled down to the safe
temperature limit.
Wait until the oven cools and the symbol
goes off.
Technical specifications
WARNING
If these problems persist despite these tips,
contact the Technical Service Department.
Inform the Technical Service Department of the
kind of problem you are experiencing and give
the:
1. Serial Number (S-No)
2. Model of Appliance (Mod.)
This information is on the oven identification
plate which is on one side of the opened door.
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Teka HLC 849C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Teka HLC 849C in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 2.52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Teka HLC 849C

Teka HLC 849C User Manual - English, German, Dutch, French, Portuguese, Spanish - 74 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info