780832
45
Zoom out
Zoom in
Previous page
1/112
Next page
45
User’s Guide
English
Pyrolytic self-cleaning function
WARNING
Before carrying out the pyrolytic cleaning
cycle, carefully read the safety instructions
found at the beginning of the Installation and
Maintenance booklet.
This feature allows you to run the pyrolytic
cleaning cycle during which built-up grease
deposits are burned off by the high temperatures
inside the oven.
Generally, a pyrolytic cycle is recommended
after every 4-5 uses; choose the most suitable
programme depending on how dirty your oven
is. For very dirty ovens, choose a longer cycle.
During the pyrolytic cycle the light inside the
oven will remain off.
PROGRAMMING THE
PYROLYTIC FUNCTION
IMPORTANT
Before carrying out the pyrolytic cleaning
cycle, remove all accessories and dishes from
the oven, including the shelf runners and/or
telescopic guide rails. To clean these follow
the instructions in the Installation and Mainte-
nance booklet that comes with your oven.
WARNING
Clean any spillages or excess dirt, as during
the pyrolytic cleaning cycle these can ignite
and become a fire hazard.
WARNING
Before running the pyrolytic cycle, ensure
that the oven is properly closed.
1. Turn the oven on and select the Pyrolysis
feature using the left dial.
2. Use the right dial to choose the most
suitable pyrolytic programme depending on
how dirty your oven is:
P1: Gentle pyrolysis. Lasts 1 hour.
P2: Medium pyrolysis. Lasts 1.5 hours.
P3: Intensive pyrolysis. Lasts 2 hours.
3. Confirm your choice with the button.
Immediately afterwards, the door will lock
automatically.
WARNING
If the door is not properly closed, the
pyrolysis cycle will not begin. An audible
signal will sound and the symbol will flash on
the screen .
If this occurs, close the door properly to
activate the lock and start the pyrolytic cycle.
4. When the door is locked the symbol will
light up on the clock display and the time
remaining until the end of the cycle will be
shown.
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Teka HLB840 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Teka HLB840 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 3.31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Teka HLB840

Teka HLB840 Quick start guide - English, German, Dutch, French, Portuguese, Spanish - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info