780829
34
Zoom out
Zoom in
Previous page
1/112
Next page
34 User’s Guide
Switching on and setting the time
When plugging the oven in for the first time,
the logo will appear followed by 12:00 flashing
on the screen.
You must set the time in order to use the oven.
To do this select the hour with the left control
and the minutes with the right one.
Confirm the settings by pressing the button
or waiting a few seconds.
An audible signal will be heard confirming that
the time has been set on the screen.
To change the time:
With the oven in standby (start screen), hold
the button until the time begins to flash.
Follow these steps to change the time:
WARNING
The sensitivity of the touch controls
continuously adapt to the ambient
conditions. Make sure the glass surface of
the control panel is clean and free of any
obstacles when plugging in the oven.
If the clock does not respond correctly
when you touch the glass, unplug the oven
for a few seconds and then plug it in again.
Doing this causes the sensors to adjust
automatically and they will react again to
finger touch.
DEMO MODE (Special function
for shop floors)
With the DEMO mode activated, you can
control the oven without heating.
Activating this mode is recommended if the
oven is to be plugged in at a showroom.
Activating DEMO mode
Before setting the clock, press the buttons
simultaneously until “DEMO Mode ON”
appears on the screen.
Then, set the time on the oven.
The word “DEMO” will be shown permanently
on the panel and the oven will work as normal,
but without heating up.
To deactivate DEMO mode, unplug the oven
from the socket.
WARNING
In the event of a power failure, your
electronic clock/timer settings will be erased.
The time12:00 will appear.
You can set the time as described above.
If the oven door was locked before the
power cut, the locked symbol will appear
until it is unlocked.
This may take several minutes, depending
on the temperature inside the oven, and
during this period you cannot reset the time.
Once the door is unlocked, you can set the
time as described above.
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Teka HLB 860 P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Teka HLB 860 P in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 3.31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Teka HLB 860 P

Teka HLB 860 P Quick start guide - English, German, Dutch, French, Portuguese, Spanish - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info