108745
12
Zoom out
Zoom in
Previous page
1/16
Next page
English
Installation
---------------------------------------------------
In order to fix the cooker hood to the kitchen
unit you can choose one of these three
possibilities:
a) To the upper part of the furniture, using
figure 4 where the position of the holes
denominated A is indicated. This fixation
will be made from the inside part of the
cooker hood, after disassembling the
filters.
b) To the lower part of the furniture, using
figure 4 where the position of the holes
denominated B is indicated. It is
necessary to dismantle previously the
frame, taking out the 4 screws that are
fixed to the lateral sides of the body hood.
This fixation will be made from the inside
part of the cooker hood, after
disassembling the filters. In order to
assemble the frame again once the hood
is installed, you will proceed in the inverse
way.
c) To the internal laterals of the furniture
through floating holes denominated C,
wich exist in each side of the body hood.
This fixation will be made from the inside
part of the cooker hood, after
disassembling the filters.
The lower part of the extractor must be
installed a minimum height of 60 cm
above the hob for electric cookers and 65
cm for gas cookers. (If the installation
instructions of a gas cooker indicate a
greater distance this must be observed.
When the extractor is working at the same
time as other non-electrical cooking
equipment, the outlet air pressure must not
exceed 4 Pa (4 x 10-5 bar).
To achieve optimum performance the length
of the outlet hose should not exceed 4
meters, or include more than two 90º angles
(elbows)
Although venting to the outside is
recommended, activated carbon filters may
be used, which allow the gas to be returned
to the kitchen through the outlet pipe.
If something does not work
---------------------------------------------------
Before seeking technical assistance carry
out the following checks first:
Se algo não funciona
-------------------------------------------------------
Antes de solicitar o serviço de reparações, faça
as comprovações indicadas a seguir:
DEFEITO POSSÍVEL CAUSA SOLUÇÃO
O fio de rede não está
ligado Ligar o fio à rede
O exaustor não
funciona Não chega tensão à
tomada Proceda a revisar / consertar a rede
eléctrica
Filtro saturado de gordura Proceda à limpeza ou substituição do
filtro
Obstrução da conduta de
saída de ar Elimine as obstruções
O exaustor não
aspira suficiente ou
vibra Conduta de ar inadequada Contacte com o instalador e siga as
instruções deste manual
Lâmpadas queimadas Proceda à substituição das lâmpadas As lâmpadas não
iluminam Lâmpadas frouxas Aperte as lâmpadas
Este aparelho está classificado de acordo com a Directiva Europeia 2002/96/EC sobre Resíduos e
equipamento eléctrico e electrónico (REEE). Ao garantir a eliminaçao adequada deste produto, estará
a ajudar a evitar potenciais consequências negativas para o ambiente e para a saúde pública,
derivadas de um manuseamento inadequado dos desperdicios deste producto.
O símbolo no produto, ou nos documentos que acompanham o produto, indica que este aparelho
não pode receber um tratamento semelhante ao de um desperdicio doméstico. Pelo contrário, deverá
ser depositado no respectivo centro de recolha para a reciclagem de equipamento eléctrico e
electrónico. A eliminacão deverá ser efectuada em conformidade com as normas ambientais locais
para a eliminaçao de desperdícios. Para obter informações mais detalhadas sobre o tratamento, a
recuperaçao e a reciclagem deste produto, contacte o Departamento na sua localidade, o seu serviço
de eliminaçao de desperdícios domésticos ou a loja onde adquiriu o produto.
TEKA INDUSTRIAL, S.A. Reserva-se o direito de introduzir nos seus aparelhos as correcções
que considerar necessárias ou úteis sem perjudicar as suas características essenciais.
TEKA INDUSTRIAL, S.A. reserves the right to make corrections in its appliances wherever it
considers these necessary or useful, without harming their essential features.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Teka GFH 73 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Teka GFH 73 in the language / languages: English, German, French, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 3.09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Teka GFH 73

Teka GFH 73 User Manual - Dutch - 5 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info