7
4) FIXING THE HOT PLATE
The cooktop has a special seal which prevents
liquid from infiltrating into the cabinet. Strictly
comply with the following instructions in order to
correctly apply this seal:
- take off all the movable parts of the hob.
- Detach the seals from their backing, checking
that the transparent protection still adheres to the
seal itself.
- Overturn the cooktop and correctly position seal
“E” (fig. 9) under the edge of the cooktop itself,
so that the outer side of the seal perfectly
matches the outer perimetral edge of the
cooktop. The ends of the strips must fit together
without overlapping.
- Evenly and securely fix the seal to the cooktop,
pressing into place with the fingers and remove
the strip of protective paper from the seal and set
the plate into the hole made in the cabinet.
- Fix the hob with the proper brackets “S” and fit
the prominent part into the porthole “H” on the
bottom; turn the screw “F” until the bracket “S”
stick on the top (fig. 10).
- In order to avoid accidental touch with the
overheating bottom of the hob, during the
working, is necessary to put a wooden insert,
fixed by screws, at a minimum distance of 70
mm from the top (see fig. 7).
Remark: below is the suggested clearances.
Actual installation will be veried subject to different
kitchen situations.
INSTALLATION
FIG. 9 FIG. 10
