Manual Teka DVT 98660 (page 10 of 80) (English, German, Dutch, French, Polish, Portuguese, Turkish, Spanish)

781134

Zoom out

Zoom in

1/80

Dear Customer,

Congratulations on your choice. We are certain that this

modern, functional and practical device made with first rate

quality materials will fully satisfy your requirements.

Please read all the sections in this INSTRUCTION MANUAL

before using the hood for the first time in order to obtain

maximum performance from the device and avoid faults

which may arise from incorrect use as well as minor problem

solving.

For optimal performance, the external duct should not exceed

FOUR METRES, have more than two 90 ° angles and its

diameter should be at least Ø120.

•Disconnect the device before

performing any work on the interior,

e.g. during cleaning or maintenance.

•The excessive accumulation of

grease in the hood and metal filters

may cause dripping and fire risks,

therefore it is necessary to wash

the inside of the hood and the metal

filters at least once a month.

•This device can be used by children

aged 8 and over and persons with

reduced physical, sensory or mental

capabilities or lack of experience and

knowledge, if they have been given

supervision or proper training in the

safe use of the device and if they

understand the dangers involved.

Children should not play with the

device. Cleaning and maintenance

should be performed by the user

and not by unsupervised children.

• The regulations for electrical

installations must be complied with.

•Check that the power voltage and

frequency match those indicated

on the label located on the inside

of the hood. A suitable earth must

be connected (except for Class II

devices, marked with on the

technical data plate).

•For installation, a connection

method isolated from the fixed

installation should be incorporated,

in accordance with installation

regulations (adjusted to the strength

to be endured and with a minimum

opening between the contacts of

3mm) under overvoltage category

III conditions, for the emergency

shutdown, cleaning or light

replacement. In no event should the

earth pass through this switch. This

switch can be replaced with a plug if

it is accessible in normal use.

•If the power lead is damaged it must

be replaced by the manufacturer, its

after-sales service or by qualified

personnel in order to avoid potential

danger.

•

Ventilation regulations must be

complied with.

• Air should not be extracted by ducts

used to expel fumes from equipment

Safety Instructions

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Teka DVT 98660 in the language / languages: English, German, Dutch, French, Polish, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 4.24 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Teka DVT 98660 Manual

Product: