781128

Teka DPL Manual

12
Zoom out
Zoom in
Previous page
1/76
Next page
GB
Program the working time
1)Switch on the cooker hood and choose the
required aspiration speed.
2)Push ‘Timer’.
3)Select the required programming time from
1 to 99 minutes by using the buttons ‘+’ and
‘-’.
4)The display will alternately show the clock
and the remaining programming time.
The maximum speed ‘H’ can only be
selected manually and will be changed
automatically to the second speed level after
approximately 10 minutes.
Display
On / Increase fan speed
Off / Reduce fan speed
Light
Timer
Instructions for use
You can activate or deactivate the cooker hood
by operating the functions shown in the diagram.
Switch on the extractor fan a few minutes before
you start to cook in order to ensure that a steady
air flow has been established before fumes
appear.
Allow the extractor fan to run for several minutes
after you have finished cooking (between 3 to 5
minutes) in order to expel all the grease from the
outlet duct. This prevents the return of grease,
smoke and smells.
Adjustment of the clock
1)Push the on/off’ button for 3 seconds.
2)Adjust the hour digits by pressing ‘+’ or ‘-’.
3)Push the on/off’ button again.
4)Adjust the minute digits by pressing ‘+’ or ‘-’.
5)After 3 seconds your settings are saved
automatically.
Filter saturation indicator “F”
1)When the sign ‘Saturation of the filters’ is
on, the filters should be cleaned.
2)After cleaning the filters, simultaneously
push “+” and “-” for at least 3 seconds
whereupon the sign will be switched off.
Changing light bulbs
For changing the light bulbs please contact the
manufacturer’s nearest Technical Service.
Cleaning the metal filters
During cleaning and maintenance
work, make sure the safety instructions
are complied with.
Cleaning and maintenance
•If your kitchen hood is made of stainless steel,
use proprietary cleaners mentioned in the
product instructions.
•If your kitchen hood is painted, use lukewarm
water and a neutral soap.
•Never use metallic scourers, nor abrasive or
corrosive products.
•Dry the kitchen hood using a cloth that does not
produce fibres.
•Do not use vapour cleaners
Cleaning the hood body
•To remove the filters from their fittings, press
lightly on the locks and then pull them off.
•The metal filters can be cleaned by soaking
them in hot water with neutral detergent until the
fat dissolves and then rinsing them under the tap
or using special anti-grease products. They can
also be washed in a dishwasher. In this case, it
is advisable to stack them vertically to avoid food
residues to stick to them.
•Cleaning in a dishwasher may damage the
metallic surface (blackening it), although this will
not affect its fat retention capacity.
•Once clean, leave them to dry off and then fit
them onto the kitchen hood.
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Teka DPL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Teka DPL in the language / languages: English, German, Dutch, French, Polish, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 3.21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info