724706
10
Zoom out
Zoom in
Previous page
1/63
Next page
6
3. Safety system
This appliance has a built-in safety system. To start the juicer, the lid (C) must be fully locked by the
two locking clips (G).
At the end of the cycle, set the knob (I) to "0" and wait until the sieve has come to a complete stop
before removing the cover (C).
4. Before first use
We recommend that you wash all removable parts (parts A, C, D, E, F, K) before using the
appliance for the first time (see Section 7).
• Remove the appliance from its packaging, then place it on a flat, stable, heat-resistant working
surface, remove the cover (C) and remove the protective cardboard from the sieve.
5. Starting the appliance
Place the pouring spout (F) on the juice collector (E) (fig. 1).
Place the juice collector (E) on the motor unit (H) (fig. 2).
Place the sieve (D) in the juice collector (E). Make sure that the sieve is correctly fitted onto the
drive shaft (fig 3).
• Position the cover (C) on the motor unit (H) (fig 4).
• Place the pulp container (K) on the back of the appliance (fig 5).
Position the 2 locking clips (G) on the lid (C) (fig. 6a and 6b): first lift the 2 clips (G) until you
hear the first "click" (fig. 6a); then press the bottom of each of the 2 clips (G) until you hear
another "click", which means they are fully locked (fig. 6b).
Place a glass under the pouring spout (F) at the front of the appliance.
Cut the fruit or vegetables into pieces after removing any pips if necessary.
Plug in the appliance. The cord storage (J) compartment lets you adapt the cord length.
Start the appliance using the start knob (I).
Insert fruit or vegetables using the filler (B).
Use the pusher (A), without forcing, to push the food down. Never use any other utensil.
Fruit and vegetables must always be fed into the appliance with the motor running.
Never apply excessive pressure to the pusher (A). NEVER PUSH with your fingers, always
use the pusher supplied.
Once you have finished, stop the appliance using the knob (I) and wait until the sieve (D)
has come to a complete stop.
When the pulp container (K) is full or when the flow of juice from the appliance slows, empty
the collector and clean the sieve (D).
2. Appliance description
A. Pusher
B. Feed tube
C. Cover
D. Sieve
E. Juice collector
F. Pouring spout
G. Locking clips
H. Motor unit
I. On/Off switch
J. Cord storage
K. Pulp container
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tefal ZN2501 - Toraja at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tefal ZN2501 - Toraja in the language / languages: English, German, Dutch, French, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 1,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info