5
EN
During cooking
• If is displayed (+ sound alarm) - fig. 10 carefully remove
the baskets and juice collector using oven gloves, add water
up to the maximum level. The steamer will automatically
continue the cooking process.
Delayed start
• Set the cooking time using the + and – touchpads (max. 60) -
fig. 7.
• Press the Prog touchpad -
fig. 14. The programming symbol
is displayed and the clock flashes.
• Select the time at which cooking is to finish -
fig. 7 (going
up in 15 min, then hourly steps).
• 5 sec. later the delayed start is operational and the clock
disappears. A beep then sounds for a few seconds indicating
cooking has been set.
• At the end of the delay period, the steamer automatically
switches to cooking mode.
Keep warm function
• A beep sounds twice at the end of the cooking time.
• The keep warm function starts automatically at the end of
the cooking process, and the keep warm symbol is
displayed -
fig. 11.
• The keep warm time elapsed (since the end of cooking) is
displayed.
Removing the food
• Remove the lid by the handle.
• Remove the cooking trays and steaming baskets using the
handles -
fig. 12 and 13.
• Serve the food.
To stop the steamer
• One press on the on :off touchpad stops the keep warm
function -
fig. 15.
• A second press puts the steamer on standby .
• After 1 hour in keep warm mode, the steamer switches to
standby mode. The light goes out .
• Unplug the steamer.
Do not touch hot surfaces or
hot food during cooking. Use
oven gloves.
If the water tank is empty, the
steamer stops heating.
The delayed start time can be
changed at any point.
While the keep warm function
is in operation, no other action
is possible, except stop when
required.
Use oven gloves when handling
the baskets, handles and lid.
If you want to switch off the
steamer when the « low
water level » indicator is on,
you must press twice on the
on/off touchpad.
