723331

Tefal TY8479 - Air Force Manual

9
Zoom out
Zoom in
Previous page
1/53
Next page
6
EN
In order to maintain the high performance level of your appliance, do not vacuum ultra-ne substances such as
plaster, cement or ashes, and clean the foam rubber motor protection lter at least once a month. If you perceive
that your vacuum cleaner is performing under regular average level, we recommend that you clean the foam
rubber motor protection lter more frequently.
• Remove the dust tray lid (9d) and then remove the foam rubber motor protection lter (9c) (g.21).
• Clean the foam rubber motor protection lter (9c) with warm, soapy water.
Rinse and let dry for at least 12 hours before replacing the lter on the appliance (g.22).
IMPORTANT: In order to assure optimal motor protection, make sure that the foam rubber lter is comple-
tely dry before replacing it on the appliance. You will need to let it dry for at least 12 hours before reinser-
ting it into the dust tray. An extra foam rubber motor protection lter is provided with your vacuum cleaner
so that you may use the appliance while the rst lter is still drying.
ATTENTION: Never place the dust tray components or the foam rubber motor protection lter in an auto-
matic dishwasher.
3. Vacuum cleaner care and maintenance
Wipe the main body of the appliance with a soft, damp cloth; then dry it with a dry cloth (g.23).
IMPORTANT: Do not use detergents, or aggressive or abrasive products. The transparent color of the dust
tray and/or of the separator lid may change with time; however, this will not modify the performance of
the appliance.
BATTERIES
1. Battery replacement
This appliance contains nickel-metal hydride (NiMh) accumulators which are, for safety reasons, only accessible
to professional engineers. When the battery is no longer capable of retaining its charge, the NiMh block must be
removed. In order to replace the accumulators, please visit the authorized Service Center nearest to your home.
2. Throwing away the appliance
It is important that you remove the batteries before throwing away your appliance. In order to do this, visit an
authorized Service Center or proceed as follows: disconnect the appliance from the electricity network, dismount
the neck from the main body removing the central screw, and then remove the ve (5) assembly screws located at
the back of the neck (g.24). Carefully lift the upper cover of the neck and unscrew the two electric circuit screws,
then unplug the battery block by pulling the plug (g.25). Do not throw the battery bloc into the waste bin; take
it to the authorized Tefal Service Center nearest to your home or to a place specially designated to process such
type of waste.
24 25
ENVIRONMENT
• According to current regulation, any appliance that is out of service must be taken to an authorized Service
Center, where it will be safely disposed of.
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tefal TY8479 - Air Force at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tefal TY8479 - Air Force in the language / languages: English as an attachment in your email.

The manual is 3,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info