723004
52
Zoom out
Zoom in
Previous page
1/57
Next page
49
精煮
“Expert”(精煮)功能只用於煮飯。此功能可以預設時間,時數是2
至15小時。
在待機狀態下按“Menu”(選項)鍵,直至“Expert”(精煮)功能顯
示燈亮起。此時顯示屏會顯示“--”,“Start”(開始)顯示燈會閃
Fig.13。按下開始鍵,飯煲會進入“精煮”模式,“開始”顯示
燈會一直亮著,顯示屏會顯示“--”Fig.12
內鍋無水時飯煲會鳴響一次,顯示屏會顯示“20”,這表示倒數20
分鐘後自動燉飯。
倒數完畢“保溫”顯示燈會亮起,飯煲會鳴響數次,顯示屏會顯
示“b”。打開煲蓋以飯勺攪飯以防結團。此時可以立刻用飯或將
飯作適當時間保溫 Fig.10
雖然這項烹煮功能需時稍長,但煮出的飯鬆軟可口,尤其適合煮不
易熟的米種。
達到煮飯最佳效果的建議
米量好後,用筲箕在水喉下徹底沖洗一段長時間(不用淘洗的意大利
米除外)。然後將洗淨的米和相應份量的水加入內鍋中。
確保米均勻攤鋪在煲中以使烹調均勻。
可根據個人味道加鹽調味。
可用清湯代替水,但煲底的米有可能會輕微燒焦。
煮飯時切勿打開煲蓋,否則蒸汽溢出會影響烹調時間及米飯味道。
煮飯完成,“保溫”指示燈亮著時,攪拌米飯,然後讓米飯放煲中
數分鐘,這樣能讓米飯粒粒分明。
煲粥
煲粥
“Congee”(煲粥)功能可以預設時間,時間是2至15小時。
在待機狀態下按“Menu”(選項)鍵,直至“Congee”(粥)功能顯
示燈亮起。此時顯示屏會顯示“--”,“Start”(開始)顯示燈會閃
Fig.14。按下開始鍵,飯煲會進入煮 “粥”模式,“開始”顯示
燈會一直亮著,顯示屏會顯示“--” Fig.12
鍋內的水溫達至設定值時顯示屏會顯示“40”,這表示飯煲開始倒
數40分鐘。
倒數完畢”保溫”顯示燈會亮起,飯煲會鳴響數次,顯示屏會顯
示“b”,這表示可開啟煲蓋和享用 Fig.10
雖然這項烹煮功能需時稍長,但可以煮出美味的粥。
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tefal RK1068 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tefal RK1068 in the language / languages: English as an attachment in your email.

The manual is 2,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info