723386
46
Zoom out
Zoom in
Previous page
1/49
Next page
46
Display Description of the error Possible cause/solution
1032 The robot is unable to locate its
docking station
The docking station is not connected to the mains. Please connect the
base to the mains.
The docking station is not easily accessible due to the cluttered oor
space.
Ensure the robot has easy access by clearing any clutter around the
docking station.
2001 The robot will turn o due to low
battery power
The battery power is weak and the robot is not able to return to the
docking system. Return the robot manually to the docking station in
order for it to recharge.
2010 The robot is no longer positioned
on the ground
The robot is not at ground-level.
Please place the robot on the ground.
2020 One of the robot’s wheels is jammed One of the wheels is jammed and is not working properly.
Turn o the robot and remove the blocking element.
2021 The vacuuming motor is jammed The robot is unable to properly turn on. Call the after-sales service
centre, quoting error code 2021.
2022 The power-brush is jammed/
blocked
The power-brush is not working correctly.
Turn o the robot and remove the blocking element.
Remember to clean the power-brush using the tool provided to
remove hair.
2024 The robot is unable to nd its route
The robot is blocked.
Move the robot, repositioning it in an uncluttered space and re-start
the vacuuming. Move the robot.
2025 The robot has a problem with its
fall sensors
The fall sensors are dirty. Clean the fall sensors with the cloth provided.
The robot is jammed at the top of the stairs. Move the robot.
2030 The robot’s dust collector is not
attached
The robot cannot start without its dust collector.
Attach the dust collector and its lter properly.
Place the dust collector and lter inside the appliance.
2040 The robot’s navigation sensors are
damaged
The robot is unable to properly turn on. Call the after-sales service
centre, quoting error code 2040.
2041 The robot’s gyroscope is damaged The robot is unable to properly turn on. Call the after-sales service
centre, quoting error code 2041.
2050 The robot faced an issue Switch o and switch on the robot and put it back on the docking
station. After booting, the robot will be ready for any command.
The robot does not turn on
The robot does not have sucient battery power to turn on.
Place the robot on the docking station; ensure the ON/OFF switch
under the robot is in the OFF position.
Set the switch to the ON position.
6.
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tefal RG7765 - Robot Explorer at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tefal RG7765 - Robot Explorer in the language / languages: English, Polish as an attachment in your email.

The manual is 8,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info