574497
8
Zoom out
Zoom in
Previous page
1/184
Next page
8
ACCESSORIES USED:
- Blender jug (D).
2.1 - ASSEMBLING THE ACCESSORIES
• Place the multi-function head (A3) in the horizontal position: press the button (A2) and manually lower the multi-
function head (A3) until it locks (the button (A2) returns to its initial position).
• Unlock the safety cover (A5) from the high-speed outlet (A4) by rotating it anti-clockwise and then remove it.
• Make sure that the appliance is switched off before locking the blender (D).
• Lock the blender jug (D) on the outlet (A4) by rotating it clockwise.
• Place the food in the blender jug, and lock the lid (D2) fitted with the measuring cap (D3), by rotating it anti-
clockwise.
2.2 - USAGE
• Start by turning the selector button (A1) to the desired position (from speed 4 to Max or pulse) according to the
recipe.
Use the "Pulse" position for better mixing control and for a better blending of your preparation.
You can add food through the hole in the measuring cap (D3) during preparation.
• To stop the appliance, turn the button (A1) to "0".
- Maximum time of use: 3 minutes.
Tips:
You can prepare:
- Finely blended soups, cream soups, stewed fruit, milkshakes and cocktails.
- Liquid batter (pancake, fritters, Yorkshire pudding, waffles, clafoutis and custard flans). If ingredients stick to the
sides of the bowl when mixing, stop the appliance and wait until the blades have stopped completely. Remove
the blender and push the food down onto the blades using a spatula, and put your blender back on the appliance
to continue processing.
• Never fill the blender jug with boiling liquid.
• Never run the blender jug empty.
• Always use the blender jug with its lid.
• Never remove the lid before the blades have stopped completely.
• Always pour liquid ingredients into the blender jug first before adding solid ingredients.
2.3 - DISMANTLING THE ACCESSORY
• Wait for the appliance to come to a complete stop before removing the blender by unlocking it in the anti-clockwise
direction and put back the cover (A5) by locking it on the outlet (A4) (clockwise).
3 - MINCING (DEPENDING ON MODEL)
ACCESSORIES USED:
- Attachment holder (E).
- Assembled mincer head (F).
3.1 - FITTING THE MINCER ATTACHMENT
• Press the button (A2) to release the multi-function head (A3) and raise it until it locks in place.
• Place the attachment (E) and lock it in the anti-clockwise direction such that the outlet is in alignment with the
appliance.
• Place the multi-function head (A3) in the horizontal position by pressing the button (A2) once again.
3.2 - ASSEMBLING THE MINCER HEAD
• Hold the body (F1) by the feed tube, with the wider opening uppermost.
• Insert the feed screw (F2) (long shaft first) into the body (F1).
• Fit the blade (F3) onto the short shaft protruding from the feed screw (F2) with the cutting edges facing outwards.
• Fit the chosen screen (F4 or F5) on the blade (F3), aligning the two lugs with the two notches in the body (F1).
• Screw the nut (F6) home on the body (F1) in the clockwise direction, without locking it.
EN
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tefal QB413H Masterchef Gourmet at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tefal QB413H Masterchef Gourmet in the language / languages: All languages as an attachment in your email.

The manual is 4,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info