724972
7
Zoom out
Zoom in
Previous page
1/24
Next page
7
EN
BEFORE USING THE APPLIANCE FOR THE FIRST TIME
Make sure that the plastic packaging protecting the lters has been removed before using the appliance.
Also make sure that:
The voltage of your electrical installation corresponds to the one indicated on the appliance.
Your appliance can be used with a power plug without an earth connection. It is a class II ap-
pliance (double electrical insulation),
The appliance is positioned in the house as described above,
The air inlet and outlet grids are completely unobstructed,
Ensure the 4 filters and front panel have been correctly installed (see section titled filter as-
sembly/dismantling paragraph).
This appliance is fitted with a device that automatically prevents it from operating if the front
door is not correctly assembled.
Inserting and replacing the filters
This appliance is equipped with 4 types of lters:
Pre-filter Active carbon
filter
NanoCaptur
filter
True HEPA
Allergy+ filter
NB: For optimum performance of the appliance, only use filters provided by TEFAL.
To replace the lters, follow the instructions in the section « Disassembling/Reassembling lters».
Please note: certain filters may emit a temporary slight odour, due to the transport and storage
conditions.
SWITCHING THE APPLIANCE ON
Setting the pollution sensors
The appliance is preset to medium sensitivity.
If the air quality indicator remains:
poor after 2 hours in operation although the air seems to be purified
excellent for more than 1 hour although the air seems to be polluted
you can adjust the sensor sensitivity as follows:
1. When the air purifier is off, hold down the mode setting button for 3 seconds:
2. Set the sensitivity by briefly pressing the mode setting button:
+ Blue + Purple + Red
Low sensitivity Medium sensitivity High sensitivity
Select high sensitivity if the air purier indicates excellent air quality for more than 1 hour although the air
seems to be polluted.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tefal PU4085 - Intense Pure Air Connect at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tefal PU4085 - Intense Pure Air Connect in the language / languages: English as an attachment in your email.

The manual is 4,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info