724974

Tefal PU4066 - Intense Pure Air Manual

9
Zoom out
Zoom in
Previous page
1/39
Next page
9
EN
Timer / delayed start
If the appliance is on: you can use this button to dene the operating duration. Briey press the button to select
the number of operating hours desired (1, 2, 4 or 8) and the appliance will automatically turn o at the end of the
selected period.
If the appliance is o: briey press the button to set the appliance to turn on in a certain number of hours (1, 2, 4 or 8).
3D pure air function (adjustable grid)
You can adjust the position of the air outlet grid manually, as desired. For an optimum, even ow of puried air in
the room, set the angle to 45°; for maximum comfort, set the angle to 90°.
Control Panel Lock
The lock system prevents the purier from being accidentally mis-set during operation.
To activate it, press the button (8) for 3 sec until the locked control panel indicator turns on. To exit this mode, press
the button (8) again for 3 seconds, until the indicator turns o. When selected, the other buttons are locked.
MAINTENANCE
Always switch the appliance o with the button (10) and unplug it before conducting any maintenance
operation.
You can clean the appliance with a slightly damp cloth.
IMPORTANT: Never use abrasive products which could damage your appliance’s appearance.
Filters
Filter Action Cycles
Pre-lter Clean Every 2 to 4 weeks
Active carbon lter Replace Every 12 months
True HEPA Allergy+ lter Replace Every 3 years
NanoCaptur lter Replace
Color changing
(see Color chart on lter)
This data is based on an average use of 8 hours per day at speed 2.
The recommended frequency for cleaning and replacing the lters may vary depending on the duration of use and
the operating environment.
- The light indicates when the pre-lter needs cleaning.
- The light indicates when the active carbon lter needs replacing.
- The light indicates when the TRUE HEPA ALLERGY+ FILTER needs replacing.
- The light indicates when the color of the NanoCaptur lter needs checking.
• The NanoCaptur lter contains translucent granules which change color according to the formaldehyde absorption
rate. Refer to the color chart on the inside of the panel or the lter itself to establish the lter saturation rate. Once the
saturation rate has reached its maximum, the lter must be replaced. You have to check the lter saturation rate every
six months.
• The pre-lter can be re-used: remove the dust using a vacuum cleaner or wash with water.
CAUTION:
The appliance’s efficiency can be reduced if the pre-filter is not cleaned regularly.
Never use a pre-filter that is still damp.
The pre-filter is the only filter which can be re-used and washed with water. The TRUE HEPA ALLERGY+ FILTER,
NanoCaptur and active carbon filters cannot be cleaned and re-used. Never wash with water.
To replace the lters, follow the instructions in the section “Disassembling/Reassembling lters” .
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tefal PU4066 - Intense Pure Air at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tefal PU4066 - Intense Pure Air in the language / languages: English as an attachment in your email.

The manual is 8,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info