724970

Tefal PT7035 - Intense Pure Air turbo Manual

9
Zoom out
Zoom in
Previous page
1/27
Next page
9
EN
CHILD LOCK FUNCTION
To activate it, press the light button (10) for 3 seconds, until the child lock indicator turns on. To exit this mode,
press the light button again for 3 seconds, until the child lock indicator turns o.
Under the child lock function, the other buttons are locked.
TIMER / DELAYED START
• If the appliance is on: you can use this button to dene the operating duration. Briey press the button to
select the number of operating hours desired (1, 2, 4 or 8) and the appliance will automatically turn o at the
end of the selected period.
• If the appliance is o: briey press the button to set the appliance to turn on in a certain number of hours
(1, 2, 4 or 8).
MAINTENANCE
Always switch the appliance o with the button (13) and unplug it before conducting any maintenance
operation.
You can clean the appliance with a slightly damp cloth.
IMPORTANT: Never use abrasive products which could damage your appliance’s appearance.
This data is based on an average use of 8 hours per day at speed 1. The recommended frequency for cleaning and
replacing the lters may vary depending on the duration of use and the operating environment.
The lter needs to be cleaned or replaced when the corresponding indicator is turned on.
Note: when your appliance stops ltering, please check if you need to change the lter.
• When the pre-lter needs to be cleaned, its warning light on the control panel switches on.
• When the 2 in 1 HEPA and active carbon lter needs to be replaced, its warning light on the control panel switches
on.
• When the NanoCaptur lter needs to be replaced, its warning light on the control panel switches on.
The NanoCaptur lter contains translucent granules which change color according to the formaldehyde
absorption rate. Refer to the color chart on the inside of the panel or the lter itself to establish the lter saturation
rate. Once the saturation rate has reached its maximum, the lter must be replaced. You have to check the lter
saturation rate every six months.
• The pre-lter can be re-used: remove the dust using a vacuum cleaner or wash with water.
IMPORTANT: resetting the filters
Once the lter has been replaced, hold down the lter function for 3 seconds.
Forced reset:
If you have replaced a lter before its end of life, force the reset of the lter replacement cycle:
1. When the appliance is on, hold the reset button (11) for 3 seconds.
2. Press the reset button briey to select the lter you have changed.
3. After selecting the lter to reset, hold the reset button (11) for 3 seconds. The electronic meter is then reset.
4. If no button is activated for 10 seconds in forced reset mode, the reset mode is canceled.
Filters Action Cycles
Pre-lter Clean Every 2 or 4 weeks
2 in 1 HEPA and active carbon lter Replace Every 36 months
NanoCaptur lter Replace Every 12 months
FILTERS
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tefal PT7035 - Intense Pure Air turbo at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tefal PT7035 - Intense Pure Air turbo in the language / languages: English as an attachment in your email.

The manual is 17,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info