816048

Tefal P2580 Secure 5 Manual

39
Zoom out
Zoom in
Previous page
1/133
Next page
■USING THE OPERATING VALVE A
To fit the operating valve (A):
Caution, these operations must only be carried out
when the product is cold and not in use.
• Place the operating valve (A) in position, aligning the
symbol on the valve with the positioning mark (H)
as shown in the diagram opposite.
• Press down on the valve then turn it to the symbol
or as shown in the diagram opposite.
To remove the operating valve:
Caution, these operations must only be carried out
when the product is cold and not in use.
• Press down on the valve then turn it to align the
symbol with the positioning mark (H) as shown in
the drawing opposite.
• Remove the valve as shown in the drawing opposite.
To cook vegetables or delicate foods:
• Position the pictogram on the valve opposite the
positioning mark (H) - Fig. 7.
• Pressure operates at 50kPa (7 psi / 7lbs pressure).
To cook meat or frozen foods:
• Position the pictogram on the valve opposite the
positioning mark (H) - Fig. 8.
• Pressure operates at 80kPa (12 psi / 12lbs
pressure).
BEFORE FIRST USE
• Thoroughly clean the pressure cooker and its components before first use.
• Place the basket trivet (K) in the bottom of the pot and place the basket
(J) on top of it*.
• Fill the pot to two-thirds full with water (maximum mark (Max 2) for filling (O)).
• Close the pressure cooker.
• Position the symbol opposite the positioning mark (H) - Fig. 8.
• Place the pressure cooker on a heat source, then set to maximum power.
It is normal for steam to be present near the pressure indicator (D) when
the product begins operating.
• When steam begins to escape from the valve, turn down the heat and leave
for 20 min.
• For models equipped with a timer, program 20 min.
*Basket and timer not included with certain models.
• After the 20 min is up, turn o your heat source.
• Gradually turn the valve (A), adjusting the speed that the pressure is
released by how far you open the valve, until it aligns opposite the symbol
- Fig. 9.
• When the pressure indicator (D) drops down, your pressure cooker is no
longer under pressure.
• Open the pressure cooker - Fig. 1 - 2.
• Rinse the pressure cooker with water and dry it.
■BEFORE COOKING
• Before each use, remove the valve (A) (see section
‘Using the operating valve’) and check visually and
against the light that the steam release outlet (B) is
not obstructed (See diagram opposite). If necessary,
clean it with a toothpick - Fig. 10.
• Check that the piston (C) is mobile (see drawing
opposite) and see section ‘Cleaning and maintenance’.
• Add your ingredients and the liquid.
• Close the pressure cooker - Fig. 3 and ensure that it is
properly closed - Fig. 4.
• Position or on the valve to the positioning
mark H - Fig. 7 or 8.
• Place the pressure cooker on a heat source, then set it
to maximum power.
74
73
EN
… 39 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tefal P2580 Secure 5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tefal P2580 Secure 5 in the language / languages: All languages as an attachment in your email.

The manual is 7.61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info