699928

Tefal OptiGrill Smart GC730D Manual

42
Zoom out
Zoom in
Previous page
1/48
Next page
42
EN
Troubleshooting guide
Problem
Cause Solution
Button flashing
+ Indicator light solid green
+ Button blinking
• Switching on the
appliance or starting
an automatic cooking
cycle with food
and without plates
preheating (manual
mode is automatically
activated).
• 2 possible options:
– (Manual mode) Choose the
temperature setting by pressing the
button and then press OK. Allow
to cook, but you must monitor the
cooking.
– (Automatic cooking program) Stop
the appliance, remove the food, close
the appliance properly, re-program
the appliance and wait until end of
preheating.
The appliance stops during the preheating
or cooking cycle.
• The appliance has been
kept open for too long
while cooking.
• The appliance has been
idle too long after the
end of warm up or keep
warm.
• Disconnect the appliance from the
outlet and leave for 2-3 mins., restart
the process. The next time you use the
appliance, make sure you open and close
it quickly for best cooking results. If the
problem occurs again contact your local
Tefal customer service.
The indicator light will flash white
+ Button / / / / flashing
+ Intermittent beeping
• Appliance failure.
• Appliance stored or used
in a room that is too cold.
• Disconnect and reconnect your
appliance and immediately restart a
preheat cycle. If the problem persists,
contact Customer Service.
The device does not beep.
The indicator light will flash white
+ Button flashing
+ Continuous beeping
• Appliance failure. • Unplug the appliance and contact
customer service.
After preheating, I placed the food inside
and closed the appliance, but the
indicator light stays purple and cooking
does not begin.
• The quantity of food
inside the appliance is
greater than 4 cm.
• Th thickness of the food should not
exceed 4 cm.
• The grill was not opened
completely when placing
the food inside.
• Open the grill completely and close it
again.
• The appliance does not
detect food inside The
food thickness is too
thin, “OK” is flashing.
• For thinner foods, press the button
to ensure the appliance recognises the
food and that the cooking cycle begins.
The appliance turns itself to manual mode
+ The indicator light will flash red.
+ button temp control and light
fixed
• Preheating time was cut
short.
• Monitor the cooking periodically
(for use in manual mode).
Or
• Press the ON/OFF button to stop the
grill, remove food, close the grill, select
the new cooking program you wish to
use and wait for the preheating cycle to
finish before adding the food (for use in
automatic mode).
… 42 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tefal OptiGrill Smart GC730D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tefal OptiGrill Smart GC730D in the language / languages: English, German, French as an attachment in your email.

The manual is 20,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info