10
Description
a
b
c
d
e
Motor unit.
Speed selector + Turbo.
Ejection button (for whisk or mixer
removal).
Multi-blade mixer for light preparations.
Mixer for heavy pastries.
f
g
h
i
j
Retractable cord storage system.
Hook mixers (Option – Available
from your retailer ref. SA192377).
Storage base.
Lid.
Insert for transport.
Precautions of use
• To avoid accidents, ensure that long hair, ties, clothes or other objects do not catch
on the moving parts of the appliance.
• In order to prevent injury to yourself and to others, and to avoid damaging the
appliance, do not touch the whisks or mixers or insert any objects (knife, fork, spoon,
etc.) into the accessories. A spatula may be used instead, only when the appliance is
not in operation.
• To avoid damage to the appliance, never place the appliance or its accessories in the
freezer, oven or micro-wave.
• The whisks and mixers are designed for preparing food. They must not be used for
mixing other products.
• Do not use the box lid as a container.
First Use
Open the box and dispose of the soft plastic part (j) on the top of the appliance.
Remove the accessories from the packaging and clean them with hot water.
Using the appliance
1. Check that the speed selector (b) is set at “0”.
2. Insert the whisks (d) or mixers (e) into the holes and lock (fig.1). The whisks and
mixers must be placed as shown in figure 1. Both whisks must be of the same length.
The “click” indicates that the accessories are correctly in place.
3. Unwind the required cord length and plug the appliance in.
- A deep bowl should be used for mixing.
- To avoid splashing, place the whisks in the preparation before switching the
appliance on.
- Press the speed selector (b) to switch the appliance on, first on speed 1 then on
speed 2, 3 and 4 as the preparation thickens. Use the “Turbo” position if the recipe
requires higher power.
- Switch the appliance off before removing the whisks from the preparation (to avoid
splashing).
4. After use, open the retractable cord storage base under the appliance and wind the
cord in while leaving 15 cm cord length outside the base. Close the cord storage
element and place the appliance and accessories in the storage base.
