816119

Tefal HT4611 Prep Mix Manual

13
Zoom out
Zoom in
Previous page
1/65
Next page
EN Dear customer, thank you for choosing our hand mixer, Prep’Mix+! Please find here all the
information you may need about its use. We hope you will enjoy it!
N.B.: A booklet containing safety guidelines is provided with this appliance.
Before using your appliance for the rst time, please read the booklet carefully and keep it in a safe
place.
Before use, remove all accessories from their packaging and clean them using hot water and
a little washing up liquid, except moto unit (A). Rinse well and dry thoroughly.
FIRST USE
USING HAND MIXER
• Check that the speed control (A2) is set to “0”.
• Insert the rod of each beater (B) or kneader (D) into the corresponding holes and lock
into place until “click”. The beaters and kneaders have a specific shape, the kneader
or beater with the beater marker (C) should be positioned to the right, in the
biggest hole.
• Connect the appliance:
– Your appliance has ve speed levels and a Turbo button. Always begin mixing or kneading
at setting 1 initially, then move to setting 2, 3, 4 or 5.
• After nishing, set the speed control (A2) to “0”.
• Disconnect.
• Then press the ejection button (A1) to remove the beaters or mixers.
USING THE BASE (L) (ACCORDING TO MODEL)
• Place the base (H) on the worktop.
• To raise the arm, unlock by pressing on the button (M)
• Position the bowl (K)
• Press on button (M) to unlock the arm and lower it
• Place the mixer (A), tted with kneaders (F) or beaters (E), on the hinged arm until you hear
it click into place The beaters and kneaders have a specic shape, the kneader or beater with
the beater marker (G) should be positioned to the right, in the biggest hole.
• Connect the appliance as instructions above using hand mixer
• After nishing, set the speed control (A2) to “0”.
• Disconnect and press the unlock button (M) to raise the hinged arm. Then press the mixer
unlock button to remove the mixer from its stand.
• Then press the ejection button (A1) to remove the beaters or kneaders.
USING THE HANDBLENDER FOOT (H OU I) (ACCORDING TO MODEL)
Check that the speed control (A2) is set to “0”.
• Remove the panel at the back of the appliance (A) and screw the handblender foot (H or I)
by turning clockwise without forcing it, until you will hear a small click, the rod is correctly
positioned (Fig. 12 and 13).
• Connect the appliance:
– Dip the Mixer rod in the preparation before starting to avoid splashing.
– Start using the Eject button
– Stop the appliance before removing from the Blender rod (to avoid splashes).
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tefal HT4611 Prep Mix at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tefal HT4611 Prep Mix in the language / languages: All languages as an attachment in your email.

The manual is 2.98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info