11
marker (G) should be positioned to the left, in
the biggest hole (Fig.1).
• Connect the appliance:
- Your appliance has five speed levels and a
turbo button. Always begin mixing or
kneading at setting 1 initially, then move to
setting 2, 3, 4 or 5.
- To knead thick consistent doughs we
recommend using setting 5 only.
- You can also increase the speed by pressing the
turbo button (A3): this function can be used at
all speeds. We recommend that it is only used
briefly (a maximum of 30 seconds for thick
consistent doughs).
• After finishing, set the speed control (A2) to “0”.
• Disconnect.
• Then press the ejection button (A1) to remove
the beaters or mixers.
• Using with the base (H): (According to model)
• Check that the speed control (A2) is set to “0”.
• Insert the rod of each beater (C) or mixer (E) into
the corresponding holes and lock into place. The
beaters and kneaders have a specific shape,
the mixer or beater with the left beater marker
(G) should be positioned to the left, in the
biggest hole (Fig.1).
• Place the base (H) on the worktop:
- To raise the arm, unlock by pressing on the
button (J) (Fig.4).
- Position the bowl (I) (Fig.4).
- Press on button (J) to unlock the arm and lower
it (Fig.5.)
- Place the mixer, fitted with kneaders or beaters,
on the hinged arm until your hear it click into
place (Fig.6).
• Connect the appliance:
- Your appliance has five speed levels and a turbo
button. Always begin mixing or kneading at
setting 1 initially, then move to setting 2, 3, 4 or 5.
- To knead thick consistent doughs we
recommend using setting 5 only.
Note:
INSERT THE MIXER
BY POSITIONING
THE BEATERS OR
KNEADERS IN THE
NOTCHES (Fig.6)
