725078
13
Zoom out
Zoom in
Previous page
1/48
Next page
13
EN
The humidification ca-
pacity is too low
There is natural or artificial air
replacement in the room which
interfere the increase of HR%.
Check if doors and windows are closed.
Check if there is no air conditioning working
in the room.
The air inlet grids and nozzle
could be blocked.
Remove any blocking items from the grids
and the nozzle.
There is too much scale in the
water basin or on the piezo
part.
Replace the anti-scale cartridge
The Humidity selected rate is
too low.
Increase Vaporization Speed in CONTROL
MODE.
Increase Humidity setting in CONTROL
MODE.
The ambient humidity
is too high
The appliance is working in
CONTINUOUS MODE.
Change the mode.
The humidity target is too high. Select a lower RH% target.
There is condensation
in the room
The room temperature is too
low.
Heat the room up.
The appliance is too
noisy
Place the appliance on a flat and stable sur-
face.
There may be resonance in
water tank due to low water
level.
Refill the water tank.
The mist suddenly
stops
coming out
Programmed timer period has
run out.
Turn your product on.
The water level indicator is
blinking.
Refill the water tank.
The target humidity level is
reached.
The warm mist func-
tion doesn’t produce
any warm humidity
The product is in warm-up
phase.
Wait a few minutes till the end of the phase.
The mist is too fine to feel the
warmth.
Increase the speed level.
The room temperature is too
cold and the mist may cool
down too quickly.
Increase the speed level and Heat the room
up.
The appliance does
not work with no
display on screen
There is no power supply. Plug in power plug in main sockets.
There is abnormal
smell mist
It’s first use of appliance.
The smell will disappear after several mi-
nutes of use.
The water used is dirty or has
rested too long in water tank or
water base.
Clean the water tank and the water base
according to the Maintenance Instructions.
Mist fog is coming out
from around nozzle
There are apertures between
the nozzle, the cover and the
water tank.
Reposition the cover and check if the nozzle
is well plugged in the cover.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tefal HD5235 - Aqua Perfect at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tefal HD5235 - Aqua Perfect in the language / languages: English, Polish as an attachment in your email.

The manual is 1,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info