574509

Tefal HB8601 InfinyForce Manual

14
Zoom out
Zoom in
Previous page
1/94
Next page
IMPORTANT: Do not operate the appliance when empty.
- Before mixing hot preparations, remove the container from the heat source. For
best results, there is no need to move the blender shaft around in the prepara-
tion. Instead insert the shaft in the centre of the container with the blender
head submerged halfway down in the food.
- For stringy ingredients (leeks, celery, etc.), clean the shaft regularly during the
preparation, ensuring that you follow the safety instructions for dismantling
and cleaning the appliance.
- When making fruit-based preparations, slice the fruit and remove the cores and
any stones beforehand.
- Do not operate the appliance to prepare hard ingredients (sugar, chocolate, cof-
fee, ice-cubes).
- Do not operate the mixing foot (C) at TURBO speed for more than 20 seconds.
• Mini chopper 150 mL (depending on model): FIG E & 5
- Fit the blades (E2) onto the drive pin of the bowl (E1).
- Place the ingredients in the bowl (E1) then fit the inner cover (E3) then the lid
(E4).
- Fit the motor unit (A) onto the lid (E4).
- Plug in the motor unit (A) and press the speed start button (B2) and process
food.
- Remove the motor unit (A) then the lid (E4) then the inner cover (E3).
- Remove the blades (E2), holding it by its plastic part.
- After use, remove the ingredients.
- Do not operate this accessory when empty or for more than 10 seconds.
• Chopper 500 mL (depending on model): FIG F & 6
- Place the bowl (F1) on the anti-slip base (F4).
- Fit the blades (F2) onto the drive pin of the bowl (F1).
- Place the ingredients in the bowl (F1) then fit the cover (F3).
- Fit the motor unit (A) onto the cover (F3).
- Plug in the motor unit (A) and press the speed start button (B2).
- Remove the motor unit (A) then the cover (F3).
- Remove the blades (F2) holding it by its plastic part.
- After use, remove the ingredients.
- Do not operate this accessory when empty or for more than 30 seconds.
• Multi-wire whisk (depending on model): Fig G & 7
- Fit the multi-wire whisk (G2) onto the reducer (G1).
- Fit the reducer (G1) onto the motor unit (A).
- Turn until it is locked in place.
- After use, unscrew the reducer (G1) and remove the whisk (G2).
14
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tefal HB8601 InfinyForce at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tefal HB8601 InfinyForce in the language / languages: All languages as an attachment in your email.

The manual is 4,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info