721141
32
Zoom out
Zoom in
Previous page
1/88
Next page
C - Cooking
After pre-heating, the appliance is ready for use.
To preserve the non-stick properties of the coating:
- as a preference, use a wooden spatula to turn the food over,
- never cut food directly on the plates - 7a,
- do not cook food in aluminium foil.
To prevent damage to the plates, only use them on the appliance for which they were designed (e.g., do not place in
an oven, on the gas ring or electric hot-plate, etc.).
Do not use aluminium foil or other objects between the plates and the food being cooked.
Do not place cooking utensils on the cooking surfaces of the appliance.
Do not touch the metal parts of the appliance when it is heating or operating, as they are very hot: use the handle
and wear oven gloves if necessary.
Do not move the appliance when in use.
Do not remove the juice tray during cooking. At the end of cooking of each batch of meat, check that the juice
has not reached the MAX. level. If the MAX level is reached, wait for the appliance to cool down completely then
empty the juice tray before putting a new lot of meat onto the appliance.
For the grill function
Place the food on the lower grill plate - 7a.
Close the appliance.
Let the food cook according to the instructions in the cooking table.
The space between the two grill plates is adjusted automatically (0 cm to 3,5 cm) depending on the thickness of the
food to be cooked - 7a.
When you cook meats containing bones, use the barbecue position to ensure the meat is cooked uniformly.
For the barbecue function
Spread the food evenly on the two grill plates - 7b.
When only one cooking surface is used, as a preference use the upper grill plate.
Let the food cook according to the instructions in the cooking table.
D - After use
Place the thermostat in the min. position.
Unplug the appliance. Open the appliance.
Let the appliance cool down (approximately 1 hour) in the open position.
Empty the juice tray. Be careful not to move the appliance when the tray is full.
Once cooled down, close the appliance.
To remove the grill plates:
- open completely the appliance (barbecue function) by setting the blocking button to position 3.
- the top plate, first: press the unlock button, lift the plate and remove it from the side - 8a - 8b - 8c,
- then the bottom plate: press the unlock button, lift the plate and remove it from the side - 9a - 9b - 9c.
The juice tray and plates can go into the dishwasher or be cleaned with a sponge, hot water and washing up liquid -
10a - 10b.
The appliance and its power supply cord must not be put in the dishwasher.
Do not place the hot plate under water or on a fragile surface.
Do not use metal scourers or scouring powders to avoid damaging the cooking surface (e.g.: non-stick coating, ...).
EN
32
EVIDPRELUD-2016273232:EVIDPRELUD-2016273232 17/11/09 10:46 Page32
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tefal GC5001 - Evidence at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tefal GC5001 - Evidence in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 3,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info