816144
13
Zoom out
Zoom in
Previous page
1/51
Next page
HOW TO
DISMANTLE
AND REASSEMBLE
THE METAL PLATE
HOW TO REMOVE THE METAL
PLATE:
Grip the metal plate holding it by the seal, and
unscrew the central nut in an anti-clockwise
direction. Remove the nut and keep it in a safe
place. Press the spring loaded screw spindle to
release the metal plate. Remove the metal plate.
PUTTING THE METAL PLATE BACK
IN PLACE:
Grip the metal plate by the seal as shown
in the picture. Line up the metal plate with the
central screw spindle and press it flat against
the underside of the lid. Put the nut back on
with the flat side facing the metal plate and
turn it clockwise, tightening it as far as it will go.
HOW TO TAKE THE VALVE COVER OFF:
Hold the valve cover by its middle part (as shown) ;
Then turn it slightly to unclip it.
Clean the valve cover, paying special attention to the inside
(check that there is no left over food).
PUTTING THE VALVE COVER BACK:
Take the valve cover as shown in the picture
(gripping the middle).
Line up the interior circular shape with the three
hooks and then push so that the valve cover clips
on (you should hear a “click” sound).
The valve cover must be close up against
the inside of the lid.
ACCESSING THE DECOMPRESSION BALL:
When the lid is completely cool, turn the ball cover, anti-clockwise, so as to
bring the I marker into position . Lift off the cover. Remove the ball, and
gently clean it, along with its cover, with water and some washing-up liquid.
Dry the ball using a soft cloth, then put it back in position. Put the ball cover
back in place, and the marker I in position . Lock it by turning the ball
cover so that the marker is opposite the pictogram “closed” .
Note: The metal decompression ball may
still be hot even when the lid has cooled
The notches on the rotating inner part of the lid must be correctly aligned with
the notches on the rim of the bowl otherwise the lid will not lock when closed.
3 4 5
Safety
valve Manometric
rod
1 2
13
BEFORE USE
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tefal CY8518 Cook4me at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tefal CY8518 Cook4me in the language / languages: English as an attachment in your email.

The manual is 12.31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info