722463
44
Zoom out
Zoom in
Previous page
1/48
Next page
PROBLEMS POSSIBLES CAUSES SOLUTION
The lid does not close. There are foreign bodies between the
bowl and the heating plate.
Remove the bowl, check that the heating plate, central element and under
the bowl are clean. Also check that the central element can move around.
The lid open/close handle is not
correctly positioned.
Check that the open/close handle is completely open.
The metal plate and/or the tightening
screw are not properly installed or fully
tightened.
Check that the nut is fully tightened and that the notches on the rotating
inner part of the lid are correctly aligned with the notches on the rim of the
bowl and then try locking the lid closed. The nut must be fitted with the flat
side facing the metal plate.
The appliance does not
depressurise.
The ball cover is not in place. Let the appliance cool completely and then remove the metal plate and
correctly position the ball cover (fixed in the lock position).
The lid does not open
once the steam is
released.
The manometric rod is still in the high
position.
After ensuring that no more steam is released and that the appliance is
completely cold, insert a fine metal skewer into the hole located between the
open handle and the silencing valve. Be careful of hot steam being released
once the skewer is pushed in. When no more steam is released, try to open
the appliance.
The appliance does not
become pressurised.
Check that the seal, purple safety valve
and manometric rod are clean.
Clean your appliance by following the cleaning and maintenance instructions
in this book.
Check that the lid is locked and the
marking is properly aligned with
the closed padlock. Check that the
manometric rod can move around and
if it needs cleaning.
Clean the manometric rod as instructed in the Cleaning and Maintenance
section.
The decompression ball is not
positioned correctly or dirty.
Check that the ball is correctly positioned and that the cover is in the locked
position. Clean and dry the ball and its support.
ERROR CODES
Code 24: the pressure decreases while
pressure cooking.
Code 21 and 26: pressure fails to raise.
Add liquid to your recipe (water, stock or a liquid sauce) 50-100ml at a time
and re-start the recipe.
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tefal CY7038 - Cook 4 Me at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tefal CY7038 - Cook 4 Me in the language / languages: English as an attachment in your email.

The manual is 15,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info