327966
20
Zoom out
Zoom in
Previous page
1/32
Next page
Connection
and pre-heating
It is essential to pour 4 litres
of water into the base of the
appliance (8) to ensure that
the barbecue works
properly.
Pour the water into the
opening (8a) provided for this
purpose at the rear of the base
of the appliance (8).
If your appliance is not equipped with
support legs ( – *11/*12/*13), place it on
a stable heat resistant surface.
Do not use it on a flexible type of support,
such as a rubberised protective cloth.
Never place the appliance directly onto a
fragile surface (glass table, cloth, varnished
furniture...).
To avoid overheating of the appliance, we
recommend you do not place it in a corner
or against a wall.
Unwind the cord completely.
Check that your electrical installation is
compatible with the power and the voltage
indicated under the appliance.
You should regularly examine the power
supply cord so as to detect any signs of
wear. Do not use the appliance if the cord is
damaged.
If the power supply cord is damaged, it
must be replaced by the manufacturer or its
service agent or a similarly qualified
person in order to avoid any danger.
Connect the appliance to a socket with an
earth connection.
Supply the appliance through a residual
current device (RCD) having a tripping
current not exceeding 30 mA.
E
D
D
GB
20
If an extension cord is used:
- it must be with an incorporated earth
connection;
- take every precaution to ensure that
people cannot become caught up in it.
Plug the cord into the mains.
Never plug the appliance in when not in
use.
Never use the appliance when it is empty.
Never use the appliance with the protection
lid (2) closed.
Set the thermostat to the Maxi position.
Leave to pre-heat the appliance for
10-15 minutes.
On first use, the appliance may smell slightly
and possibly give off smoke for the first few
minutes – this is normal.
Never leave the appliance unattended when
in use.
WARNING: do not use charcoal or any other
combustible material in the appliance.
Cooking
After pre-heating, the appliance is ready to
be used.
Set the thermostat to the position of your
choice.
Leave to cook depending on your taste.
Ensure that there is always water in the
base during the use of the appliance.
If water needs to be added
during cooking, pour it into the
opening (8a) provided for this
purpose at the rear of the base
of the appliance (8).
Do not touch metallic parts while the
appliance is on as they are very hot.
Do not cook food in tinfoil.
Never place aluminium foil or anything else
between the grill plate and the food to be
cooked.
D
D
Grill'n Pack plaque 11/05 24/11/05 15:02 Page 20
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tefal cb 7031 grill n pack contact at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tefal cb 7031 grill n pack contact in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info