659550
71
Zoom out
Zoom in
Previous page
1/90
Next page
66 67
EN
USING YOUR APPLIANCE
Moisten the seal (C3) and position
it correctly onto the blade unit
(C1).
Place the assembly (C1+C3) on
the base of the jug (C4). Lock it
by rotating the blade unit through
a quarter turn in the anticlockwise
direction. (Fig. 2).
Place the ingredients into the
assembled jug without exceeding
the maximum level indicated:
* 1,75 litres
Fit the lid (C5) on the jug. Place the
measuring cap (C6) in its recess
on the lid.
Place the blender jug assembly
(C) on the motor unit (A).
Make sure that the appliance has
been switched off and position
the jug on the motor unit so that
the notches of the jug engage
with the grooves on the motor unit.
Check that the jug is positioned
horizontally and the appliance
is on a flat, stable, heat-resistant
surface away from sources of heat
or water splashes.
The blender motor runs the blades
at high speed in order to ensure
thorough mixing. Consequently,
it is important that the blender is
always placed on a flat, dry surface
before it is operated. Check that
the jug is positioned correctly on
the motor unit. If not, the blender
will not operate.
Never use the blender for more
than 3 minutes at a time. Let the
blender rest for 1 minute before you
operate it again (in order to avoid
overheating).
Caution: leaks can occur if the
jug is not locked correctly.
Plug in the appliance and turn the
function selector to “program”,
and the indicator lights of the on/
off button and the function buttons
start flashing. Choose the optional
program function by means of the
buttons “ice crush”, “smoothie” or
“auto-clean”. Each function has
a programed processing time
(see more under the different
functions), but blending can be
stopped manually by pressing the
on/off button in the middle of the
function selector. The blender also
has a variable speed selector that
is activated by turning the function
button to setting min-max.
Your appliance is equipped with
a thermal cut-out. In case of
overheating your appliance will turn
off automatically. Disconnect the
appliance and let it cool down for
about 30 minutes, then resume use.
Functions of the blender:
Ice crush: Put max 200 g of ice
cubes in the jug. The blender works
in pulse intervals for approx. 1 minute
unless it is switched off manually by
means of the on/off button or by
pressing the ice crush button.
Smoothie: The blender works at
various speeds alternating for
approx. 1 minute unless it is switched
off manually by means of the on/ off
button or by pressing the smoothie
button.
Auto Clean: This function allows
you to clean the jug. Add 1250ml of
warm water and a drop of washing
up liquid inside the blender jug. Press
Autoclean button.
The blender works at various speeds
alternating for 45 seconds, unless it is
switched off manually by means of
the on/off button or by pressing the
Autoclean button again. Then rinse
thoroughly.
71


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tefal BL850D Mastermix at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tefal BL850D Mastermix in the language / languages: English, Dutch, Polish, Spanish, Spanish as an attachment in your email.

The manual is 2,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info