723947
8
Zoom out
Zoom in
Previous page
1/55
Next page
5
Using the blender for the first time
Before using the blender for the first time, clean all accessories (D & E) in hot soapy water (except for the motor unit
(A): see “Cleaning” §). Rinse and dry them carefully. Handle the blades with extreme care.
Ensure that all packaging has been removed before using the blender.
Using the blender
Lock the blade holder (D3) onto the glass jug (D2) by giving it a quarter turn anti-clockwise (1a, 1b).
Place the blender jug (D) onto the motor unit (A) (1c).
Place the food to be blended into the glass jug (D2), starting with the liquid ingredients first, never exceeding the
maximum level (1.2 litre).
Plug the appliance in, turn it on and choose the speed most suitable for your preparation using the speed selector
switch (B).
To stop the appliance, turn the speed selector switch (B) to 0.
The lid and its measuring cap (D1) must always be properly fitted when the appliance is working. To add
ingredients while the blender is operating, insert them through the feeder hole in the lid.
Ice crushing
Put some ice cubes into the glass jug (D) (12 to 15 ice cubes). There is no need to add water.
Press the “Ice Crush” button (C) in quick succession but do not hold the button down.
Using the ice stick (E) (depending on model)
This accessory enables you to cool mixtures down, or keep them cool.
Fill the container (E1) with coarse salt right up to the level indicated inside (2a). Then fill it with cold water (2b).
Screw the handle (E2) of the container on very tightly (2c) and shake until the salt dissolves.
Place the ice stick (E) in the deep freezer, preferably in an upright position, until the salt water mixture has frozen
(12 hours minimum).
Make your preparation in the blender, and then introduce the frozen ice stick (E) through the feeding hole in the lid.
This will keep your mixture cooler.
You can also use the ice-stick as a mixing stick to help mix up your preparations, by introducing it through the feeder
hole in the lid.
Cleaning
Unplug the blender and remove all the accessories.
Wipe the motor unit (A) down with a damp cloth. Dry carefully.
Never plunge the motor unit (A) under water.
Rinse the glass (D) under running water, along with its accessories.
Handle the blades with extreme care as they are very sharp.
All the accessories are dishwasher-safe.
What to do if my blender doesn't work?
Start by checking the power cord and plug, then check:
that the blender (D) is properly fitted onto the motor unit (A).
that the speed selector switch (B) is in the right position.
that the glass jug (D) has not been overfilled above the maximum level (1.2 litre)
Your appliance still does not work?
Contact an approved service centre (see the list in the service booklet).
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tefal BL5201 - Simply Invents at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tefal BL5201 - Simply Invents in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian as an attachment in your email.

The manual is 4,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info