724016
56
Zoom out
Zoom in
Previous page
1/88
Next page
C
54
base of the jug (c3). Lock it by
rotating the blade unit through a
quarter turn in the anticlockwise
direction. (Fig. 2).
Introduce the ingredients into the
assembled jug without exceeding
the maximum level indicated:
* 1.25L for thick mixtures
* 1L for liquid preparations.
Lock the lid (c4) on the jug. Place
the measuring cup (c5) in its recess
on the lid.
Place the blender jug assembly (C)
on the motor unit (A). The red lock
(open is aligned in the slot on the
motor unit. (Fig. 3 - position 1)
Then rotate the blender jug (C)
through a quarter turn until the green
lock (closed) appears. (Fig. 3 -
position 2).
2 jug positions are possible: handle
on the right or left of the motor unit.
Do not use the blender for more than
three minutes at a time.
With the herb chopper (D) you can
chop ingredients like onions, garlic,
meat (cut into pieces) and dry fruits
in a few seconds, make crumbs
(rusk).
Do not use the herb chopper for
liquid preparations (fruit juices, etc.)
With the spice grinder (E) you can
grind spices in a few seconds:
coriander seeds, pepper, etc.
These accessories are equipped with
a bowl (F) that prevents access to
the blades during use.
1- Rotate the bowl (F) and pour the
ingredients.
2- Position the gasket (d1) or (e1) in
its recess on the blade unit (d2 or
e2). (Fig. 4). Position the blade unit
on the bowl aligning both the
marks on the bowl and the
blade unit. Lock the accessory by
rotating the blade unit through a
quarter turn in the anticlockwise
direction. (Fig. 5).
Caution: leaks can occur if the
accessory is not locked
correctly.
3- Rotate the assembled assembly (D
or E) and position it on the motor
unit. The red lock (open) is
aligned in the slot on the motor
unit. (Fig 6 - position 1)
4- Then rotate the assembled
accessory (D or E) through a
quarter turn clockwise until the
green lock (closed) appears.
(Fig. 6 - position 2).
5- Plug in the appliance and turn the
speed selector (B) to the desired
position or apply a few pulses. Hold
the bowl (F) when the appliance
is running. To stop the appliance,
turn the speed selector (B) back
to position “0”.
6- Unlock the accessory by rotating it
through a quarter turn in the
anticlockwise direction, until the
red lock (open) appears.
Remove the assembled accessory
(D, E) from the motor unit.
Turn it over on the worktop before
unlocking the blade unit (d2, e2)
from the bowl (F) in the reverse
order of the assembly. The blades
are very sharp: handle them with
caution to avoid injury.
You can then collect the
preparation in the bowl.
* The colour of the bowl may
change after blending certain
very hard ingredients: (cloves,
cinnamon, etc.).
SM_BLENDERFORCE_FACICLIC_400W_EE_8080013651_808001365126/05/1416:50Pag
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tefal BL3058 - Blendforce at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tefal BL3058 - Blendforce in the language / languages: English, Dutch, Danish, Polish, Swedish, Turkish, Norwegian as an attachment in your email.

The manual is 1,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info