724018

Tefal BL1161 - Maxiblend Manual

5
Zoom out
Zoom in
Previous page
1/68
Next page
9
• Fit the lid (B) to the mixer jug (C) and lock it by positioning it on the holes opposite the spout
(figure 3).
Introduce the measuring cup (A) into the lid and press into place (figure 3). You are advised to
hold the lid during operation.
• Place the mixer jug (C) on the body of the motor unit (D). The lock (open) is aligned in the
slot on the motor unit (figure 3).
• Then rotate the mixer jug (C) through a turn the lock (closed) appears (figure 3).
• Dice all the ingredients before putting them into the mixer jug (C). It is best to start with
liquids, without going over the maximum level shown on the jug (1.5L).
• Connect the appliance and start up by turning speed selector (E) to "Pulse," "1," or "2".
• To stop the appliance, bring the speed selector (E) to "0".
• Wait for the appliance back to a complete stop before removing the mixer jug (C).
• Remove the mixer jug (C) by unlocking it in opposite direction to installation.
2. Universal Mill:
• This universal mill (F) is equipped with a bowl (f3) that
prevents access to the blades during use.
• Rotate the bowl (F) and pour the ingredients.
• Position the sealing gasket (f1) in its recess on the mill
blade unit (f2) (figure 4). Position the mill blade unit
(f2) on the bowl (f3), and lock the universal mill by
rotating the blade unit (f2) through a turn in the
clockwise direction (figure 5).
• Rotate the assembled universal mill (F) and position it
on the motor unit (D). The lock (open) is aligned
in the slot on the motor unit (D) (figure 6).
• Rotate the assembled universal mill (F) though a turn
anticlockwise until the lock (closed) appears (figure 6).
• Connect the appliance and start up by turning speed
selector (E) to "Pulse," "1," or "2".
• To stop the appliance, bring the speed selector (E) to "0".
• Wait for the appliance back to a complete stop before
removing the universal mill (C).
• Remove the universal mill (F) by unlocking it in opposite
direction to installation.
• Turn it over on the worktop before unlocking the mill
blade unit (f2) from the bowl (f3) in the reverse order
of the assembly. The blades are very sharp: handle
them with caution to avoid injury. You can then collect
the preparation in the bowl.
Remark: The colour of the bowl may change after
blending certain very hard ingredients: cloves, cinnamon,
etc…
Caution: leaks can occur
if the accessory is not
locked correctly.
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tefal BL1161 - Maxiblend at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tefal BL1161 - Maxiblend in the language / languages: English, French as an attachment in your email.

The manual is 3,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info