133729
115
Zoom out
Zoom in
Previous page
1/122
Next page
4
115
I MAINTENANCE
Cleaning the indoor unit and remote controller
Cleaning the air filter
A clogged air filter reduces the cooling efficiency of this unit. Clean the filter once
every 2 weeks.
1. Lift the indoor unit panel up to an angle until it stops with a clicking sound.
2. Take hold of the handle of the air filter and lift it up slightly to take it out
from the filter holder, then pull it downwards.
3. Remove the AIR FILTER from the indoor unit.
• Clean the AIR FILTER once every two weeks.
• Clean the AIR FILTER with a vacuum cleaner or water.
Ensure before replacing that the filter is completely dry and has no defects.
4. Remove the Electrostatic Plasma Filter only when applicable from its support
frame as shown in the Figure on the left.
5.
Clean the Electrostatic Plasma Filter with water, and, if necessary with a mild
detergent. Ensure before replacing that the filter is completely dry and has
no defects.
6.
Install the air freshening filter back into position.
7. Insert the upper portion of air filter back into the unit taking care that the
left and right edges line up correctly and place filter into position.
CAUTION!
Do not touch this Electrostatic Plasma Filter within 10 minutes after
opening the inlet grille, it may cause an electric shock.
CAUTION
Use a dry cloth to wipe the indoor unit and remote controller.
A cloth dampened with cold water may be used on the indoor unit if
it is very dirty
.
The front panel of the indoor unit can be removed and cleaned with
water. Then wipe it with a dry cloth.
Do not use a chemically treated cloth or duster to clean the unit.
Do not use benzine, thinner, polishing powder, or similar solvents for
cleaning. These may cause the plastic surface to crack or deform.
WARNING
It is necessary to stop the air conditioner and disconnect the power
supply before cleaning.
House-
hold
D
rain
Cleaner
No
Thinner
Filter handle
Electrostatic Filter
man_TS1xx_uk.qxd 10-05-2007 14:13 Pagina 115
115


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tectro ts 126 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tectro ts 126 in the language / languages: English, German, Danish, French, Spanish, Finnish as an attachment in your email.

The manual is 1,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Tectro ts 126

Tectro ts 126 User Manual - Dutch, Italian, Polish, Turkish, Norwegian - 122 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info