628129
13
Zoom out
Zoom in
Previous page
1/29
Next page
. -- 14 --
WORKING WITH STATION MEMORIES
METHOD 3: ATS (AUTO TUNING STORAGE)
FM ATS:
1. Fully extend the telescopic antenna and
press the [FM] button to select FM
band.
2. Press & hold the [FM] button with
"PRESET" flashing and the
frequency start running, then you can
scan and store the available stations
within the memories. When the
frequency stop running, it means the
ATS operation has been completed;
you can rotate the [TUNING] knob
searching for those scanned and stored
stations.
MW/LW ATS:
1. Press the [AM] button to select MW/LW band.
2. Press & hold the [AM] button for ATS MW or LW.
SW ATS:
Fully extend the telescopic antenna and press the SW [
] or [ ] button to select
SW band. There are two modes for SW ATS tuning:
Mode A: Press & hold the [
] button to ATS the stations within all meter bands
Mode B: Press & hold the [
] button to ATS the stations within present meter
band only.
Notes:
1. During ATS process in FM, MW / LW or SW (mode A), pre-stored radio stations
will be replaced automatically by the new searched stations.
2. With ATS in SW (mode B), those existing memories will not be replaced; all the
newly found radio stations would be stored in the blank memories addresses.
3. If there is too many interference in you surrounding or many mirror/blank station
being stored during ATS, you should contract the telescopic antenna (FM & SW)
or rotate the radio (MW & LW) for better location. You can also push the [ANT.
GAIN] button to the position "NORMAL" or "LOCAL" to restart ATS.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tecsun PL660 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tecsun PL660 in the language / languages: English as an attachment in your email.

The manual is 1,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info