636954

Teco TWM50FA Manual

6
Zoom out
Zoom in
Previous page
1/18
Next page
5
INSTALLATION
Unpacking Instructions
1. Remove the clothes washer from the carton.
NOTE: Please dispose of packaging and
plastic bags responsibly.
2. Open the washer door and remove the
accessories from inside the washer.
3. Remove the four shipping bolts from the rear
of the washer prior to use.
4. Plug the shipping bolt holes with the supplied caps.
Choosing a location
The clothes washer should be located on a fi rm and fl at
surface. An uneven surface may cause excess operating
noise or vibration and effect the performance of the
washer.
The noise may be increased if the fl oor is
not fi rm.
It is not recommended to place on carpet
fl ooring. If this can not be avoided, place a
solid sheet under the appliance.
Choose a location which is indoor, dry, not exposed to direct sunlight, high
temperature or humidity.
It is recommended a clearance of at least 300mm away from objects and walls
on both sides and top. Ensure the clearance behind the appliance is not less
than 100mm and at least 160° clearance for the door to swing open.
Levelling the Washer (Adjustable feet)
For optimal washing performance, reduced noise and to
minimise vibration, it is important to ensure the washer is
completely fl at and level before use. Using a spirit level,
check both horizontal and vertical stability.
To adjust the feet:
1. Loosen the lock nut (A).
2. Adjust each foot (B). Turn left to raise or right to lower
as necessary.
3. Once all four feet have been adjusted and the washer
is completely level, tighten the lock nut (A).
A
B
Install supplied caps
to cover holes from
shipping bolts.
… 6 …


Need help? Post your question in this forum.

Forumrules
1

Forum

teco-twm50fa

Reset search

  • I have a teco twm50fa that over fills and won’t turn off the water, the entire machine fills with water and water pours out of the detergent drawer. Submitted on 4-5-2018 at 02:00

    Reply Report abuse

  • E11
    I’ve fixed the blockage but I can’t reset the code Submitted on 3-12-2017 at 00:42

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Teco TWM50FA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Teco TWM50FA in the language / languages: English as an attachment in your email.

The manual is 0,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info