636904
10
Zoom out
Zoom in
Previous page
1/17
Next page
7
Step 6. Carefully tilt the freezer
back to access the bottom
hinge assembly. NOTE: Do
not tilt >45
o
. Using a phillips
head screwdriver, remove the
screws holding the hinge in
place. Unscrew the adjustable
foot from the opposite side.
(Refer to Fig. 4).
Step 7. Relocate the bottom hinge
to the opposite side and
secure in place using the
same screws from step 6.
NOTE: Do not tighten
screws completely until after
the door has been correctly
placed and the seal checked.
Screw the adjustable foot into the opposite side (Refer to Fig.5).
Step 8. Replace the screws that
previously held the hinge in
place from Step 1. Remove
the cover from the opposite
side and place over screws.
(Refer to Fig. 6).
Step 9. Remove the two screws now
exposed and install the top hinge (Refer to Fig. 7).
NOTE: Do not tighten the hinge screws completely until the door
has been aligned and seals
aligned.
Step 10. Place the door on the top and
bottom hinges, align making
sure the door gasket seals
correctly. Once aligned,
tighten the hinge screws.
Step 11. Replace the hinge cover.
Fig. 4
Adjustable
foot
Bottom
hinge
assembly
Fig. 5
Adjustable
foot
Bottom
hinge
assembly
Fig. 6
Top cover
Replace
screws
here
Fig. 7
Install
hinge here
Cover
installed
here
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Teco TVF172WMPA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Teco TVF172WMPA in the language / languages: English as an attachment in your email.

The manual is 0,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info