636925

Teco TDW14WA Manual

14
Zoom out
Zoom in
Previous page
1/26
Next page
13
When you press the Start/Pause button during a wash cycle, the selected program
indicator will stop blinking and the buzzer will sound each minute until the Start/Pause
button is pressed and the wash cycle resumes.
Be very careful when opening the dishwasher door during a wash cycle as hot water and
steam may cause injury or burns.
1. A wash program should only be modifi ed if it has been running for a short time.
Otherwise, the detergent may have been released and wash water drained.
If this is the case, refi ll the detergent dispenser prior to starting another program. (Refer
to page 9).
2. Press the Start/Pause button so that the dishwasher enters stand-by mode. Press and
hold the program button in for at least 3 seconds. You can now change the selected
program. (Refer to page 12).
NOTE
If you open the door during a wash cycle, the dishwasher will pause. The program light will
stop blinking and the buzzer will sound every minute until you close the door. After
you close the door ,the dishwasher will continue the wash cycle after 10 seconds.
Items can be added at any time to a wash that has begun. It is not recommended,
however, to add items once the detergent has been released into the wash cycle. The
additional items will not receive the minimum required detergent for a complete clean.
To add items once a wash cycle has started:
1. Press the Start/Pause button.
2. Slightly open the door (<50mm) and wait for the dishwasher to stop.
3. Once the wash arms have come to a complete stop, open the door completely.
4. Add the additional items to the top or bottom baskets.
5. Close the dishwasher door.
6. Press the Start/Pause button. The wash cycle will resume after 10 seconds.
When the wash cycle has fi nished, the buzzer will sound for 8 seconds, then stop.
1. Press the power button to switch off the dishwasher
2. Shut off the water supply
3. Open the dishwasher door. Wait for a few minutes before unloading the dishwasher
to avoid handling the dishes and utensils while they are still hot and more susceptible to
breakage. This will assist in the drying process.
4. Switch off the dishwasher at the mains power source.
5. Carefully open the door completely.
NOTE: Hot dishes are sensitive to knocks. The dishes should therefore be allowed to cool
down for aprox. 15 minutes before removing from the dishwasher baskets.
6. Unload the dishwasher. It is normal to fi nd the dishwasher is wet inside.
Empty the lower basket fi rst and then the upper basket. This will avoid water dripping from
the upper basket onto the dishes in the lower basket.
START/PAUSE BUTTON
CHANGING THE PROGRAM
ADDING ADDITIONAL ITEMS
AT THE END OF THE WASH CYCLE
CAUTION
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Teco TDW14WA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Teco TDW14WA in the language / languages: English as an attachment in your email.

The manual is 2,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info