636916
14
Zoom out
Zoom in
Previous page
1/18
Next page
11
Step 9. Place the hinge on the left side and align the
holes before screwing in bolts. Do not tighten bolts
completely until after aligning the door and ensuring
proper seal between the door and the refrigerator.
Replace the hinge cover.
Step 10. Once the door is in place and all bolts (top hinge bracket and bottom
hinge bracket) are securely tightened, insert caps on right side of the refrigerator
and door.
Step 8. Remove the caps
covering the bolt holes and
door from the left top side.
Place the door onto the
bottom hinge pin.
Step 7. Fasten the
adjustable leg and frame
screw into the right side
of the refrigerator.
Step 6. The hinge pin must be removed
and relocated onto the opposite side
of the bracket. Remove the nut and
washers, relocate the pin then fasten.
The hinge pin should now be pointing
upward for the door to t onto.
Step 6
Step 7
Step 8
Step 9a Step 9b
Step 10
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Teco TBF47WMB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Teco TBF47WMB in the language / languages: English as an attachment in your email.

The manual is 0,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info