559304
19
Zoom out
Zoom in
Previous page
1/44
Next page
19
UTILIZAR O OPTIMATE 4
T
E
S
T
0.8
0.5
0.2
AMPS
T
E
T
T
S
E
E
T
0.8
0
.
5
0
.
2
AMPS
8
8
A
A
A
A
A
A
77
10
9
8
3.1
3.2
4.1
4.2
66
55
2
1
3.3
PROGRAMA DUAL: O OptiMate 4 está equipado com dois programas de carga. Só pode funcionar um programa de
cada vez. Os modelos seleccionados do OptiMate 4 serão fornecidos com o programa 1 (PADRÃO) ou o programa 2 (CAN-bus)
predefinido.
Programa 1 (PADRÃO) é o programa de carga normal para ligação directa a uma bateria em qualquer condição. Todas as
funcionalidades do programa estão activas, incluindo os modos de dessulfatização Padrão, TURBO e PULSE.
Programa 2 (CAN-bus)
activa automaticamente uma tomada de 12V em veículos equipados com CAN-bus, para carregar, testar
e conservar a bateria quando o veículo está a ser utilizado.
Os modos de dessulfatização padrão e TURBO de alta tensão
são desactivados. O modo de dessulfatização PULSE (impulsos) de baixa tensão permanece activo, para recuperar uma
bateria descarregada que fi ca ligada ao circuito eléctrico do veículo.
O programa 2 também pode ser utilizado para carregar e conservar uma bateria directamente dentro ou fora do veículo, mas não
consegue recuperar uma bateria sulfatada. Para recuperar uma bateria sulfatada, seleccione o programa 1 e siga as instruções em
BATERIAS NEGLIGENCIADAS MUITO DESCARREGADAS.
Indicação do programa quando o equipamento não se encontra ligado a uma tomada de 12V ou a uma bateria.
PADRÃO – apenas o LED#1 de energia eléctrica permanece ligado.
CAN-bus – o LED#1 de ENERGIA ELÉCTRICA permanece ligado e o LED#3 de DESSULFATIZAÇÃO e o LED#4 de CARGA fi cam
intermitentes em conjunto por breves instantes a intervalos regulares.
Para mudar de um programa para o outro:
1. Desligue o carregador da alimentação principal.
2. Ligue o conjunto de pinças de bateria ao carregador e ligue a pinça negativa directamente à pinça positiva.
3. Volte a ligar o carregador à alimentação principal.
4. Observe as seguintes indicações de LED:
Os LEDs #3+4+5+6+7 piscam 12 vezes durante a selecção do programa alternado (5x devagar, 5x rápida, 2x devagar).
Após a mudança do programa, é possível observar as seguintes indicações (com as pinças de bateria ainda ligadas):
Mudado de CAN-bus para PADRÃO: apenas o LED#1 de ENERGIA ELÉCTRICA permanece ligado.
Mudado de PADRÃO para CAN-bus : o LED #3 e o LED #4 ficam intermitentes em conjunto a intervalos regulares seguidos
imediatamente pelo LED #8.
5. Desligue as pinças de bateria. O OptiMate 4 está pronto para carregar uma bateria de acordo com o programa seleccionado.
INICIAR A CARGA
LED #1 de LIGADO - Este LED confirma a presença de alimentação AC para o carregador.
PROTECÇÃO DE POLARIDADE INVERSA: LED #2 - Acende quando as ligações da bateria estão incorrectas.
O carregador está electronicamente protegido para que não ocorram danos, e a saída permanecerá desactivada até que as ligações
sejam corrigidas.
BARRA DE CORRENTE DE CARGA: LED #8, 9, 10 - Acende quando é fornecida corrente por impulsos ou contínua à bateria.
Indicações de nível de corrente: LED #8: 0,2A LED#8+9: 0,5A LED #8+9 +10: 0,8A
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tecmate OPTIMATE 4 TM140DUAL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tecmate OPTIMATE 4 TM140DUAL in the language / languages: English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 2,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info