Manual Techwood VEK24036 (page 61 of 90) (English, German, Dutch, French)

733123

Zoom out

Zoom in

1/90

EN - 15

4. USE OF PRODUCT

4.1 Hob controls

Ceramic Heater

The ceramic heater is controlled by a 6

position knob.

The ceramic heater is operated by

turning the control knob to the required

setting. Near each control knob is a

symbol which indicates the heater that is

controlled by that knob. The on/off light

on the control panel will show if any of

the ceramic heaters are in use.

Knob Position Function

0 Off position

1 Keep warm position

2-3 Heating position at low heat

4-5-6 Cooking, roasting and boiling

position

Important: The knob rotation

direction may differ according to the

product specification.

Dual and Oval Heaters (if available)

Dual and oval heaters have two heating

zones. To activate the outer zone of a dual/

oval heater, turn the knob to

position.

Both outer zones will switch on.

To deactivate the outer zone of a dual/oval

heater, turn the knob to the ‘Off’ position.

Both outer zones will switch off.

Residual Heat Indicator (if available)

After using the hob there will be heat

stored in the vitroceramic glass called

residual heat. If the residual heat level is

greater than +60°C, the residual heat

indicator will be active for the cooking zone

which is above this temperature.

If the power supply to the hob is

disconnected while the residual heat

indicator is on, the warning light will flash

when the power is reconnected. The

display will flash until the residual heat has

decreased or until one of the cooking

zones is activated.

4.2 Oven Controls

Oven function control knob

Turn the knob to the corresponding symbol

of the desired cooking function. For the

details of different functions see ´Oven

Functions`.

Oven thermostat knob

After selecting a cooking function, turn this

knob to set the desired temperature. The

oven thermostat light will illuminate

whenever the thermostat is in operation

GKSC ZKB60X

to heat up the oven or maintain the

temperature.Oven Functions

* The functions of your oven may be

different due to the model of your product.

Defrost Function: The

oven’s warning lights

will switch on and the

fan will start to operate.

To use the defrost

function, place your

frozen food in the oven

on a shelf in the third slot from the bottom.

It is recommended that you place an oven

tray under the defrosting food to catch the

water accumulated due to melting ice. This

function will not cook or bake your food, it

will only help to defrost it.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Techwood VEK24036 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 7,95 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Techwood VEK24036 Manual

Product: