Manual Techwood GN 366 A plus (page 51 of 64) (English, German, Dutch)

623219

Zoom out

Zoom in

1/64

UK - 49 -

INSTALLING AND OPERATING YOUR FRIDGE

• Before making the connection to the power supply, ensure that the voltage on the

nameplate corresponds to the voltage of the electrical system at your home.

• Operating voltage for your fridge is 220-240 V at 50Hz.

• Before starting to use your fridge, please contact the nearest authorized servicer if

help is needed with the installation, operation and usage of your fridge.

• The main power cord of your fridge has a grounded plug. This plug

should be used with a grounded receptacle that has a 16 amper

fuse minimum. If you don’t have a receptacle conforming with this,

please have one installed by a qualified electrician.

• We do not take responsibility for any damages that occur due to

ungrounded usage.

• Place your fridge in a place where it is not exposed to direct sunlight.

• Your appliance should be at least 50 cm away from stoves, ovens

and heater cores, and should be at least 5 cm away from electrical

ovens.

• This appliance should never be used outdoors or left under the

rain.

• Fit the plastic wall spacers to the condenser on the back of the

refrigerator in order to prevent it from touching the wall and affecting

performance.

• When your fridge is placed next to a deep freezer, there should be

at least 2 cm between the appliances to prevent humidity on the

outer surface. Do not place anything on your fridge, and install your

fridge in a suitable place where there is at least 15 cm of clearance

space available on the upper side.

• If you place your fridge next to your kitchen cabinets, leave a space of 2 cm between

the appliance and the cabinets.

• Install the distance adjustment plastic (the part with black vanes at the rear) by turning

it 90° to prevent the condenser from touching the wall.

• The adjustable front legs should be set at an appropriate height to allow your fridge

to operate in a stable and proper way. You can adjust the legs by turning them

clockwise or counter-clockwise. This should be done before placing food in the fridge.

• Before using your fridge, wipe all parts with warm water mixed with a teaspoonful of

sodium bicarbonate and then rinse with clean water and dry. After cleaning, replace

all parts in their proper locations in the fridge.

Before Using your Fridge

• When operated for the first time or after transportation, keep your

fridge in the upright position for at least 3 hours before plugging it

in to allow efficient operation. Otherwise, you may damage the

compressor.

• Your fridge may have a slight odor when it is operated for the first time. The odor will

fade away when your fridge starts to cool.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Techwood GN 366 A plus in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 11,54 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Techwood GN 366 A plus Manual

Product: