Manual Techwood EHA Basic XA3 1 (page 57 of 90) (English, German, Dutch, French)

733141

Zoom out

Zoom in

1/90

EN - 12

Self-adhesive

sealing tape

Worktop mounting

bracket

• Screw the 4 worktop mounting brackets

on to the side walls of the appliance.

• Insert the appliance into the aperture.

Installation of the oven

• After making the electrical connections,

insert the oven into the cabinet by

pushing it forward. Open the oven door

and insert 2 screws in the holes located

on the oven frame. While the product

frame touches the wooden surface of

the cabinet, tighten the screws.

If the oven is installed under a hob:

• The thickness of the worktop, the

distances between the hob and the

oven must be as shown in the figures

for air circulation.

min. K (mm) 25 min. M (mm) 49

min. L (mm) 5

2.3 eleCtriCal ConneCtion anD Safety

WARNING: The electrical connection

of this appliance should be carried out

by an authorised service person or qualified

electrician, according to the instructions in

this guide and in compliance with the

current local regulations.

WARNING: THE APPLIANCE MUST

BE EARTHED.

• Before connecting the appliance to the

power supply, the voltage rating of the

appliance (stamped on the appliance

identification plate) must be checked for

correspondence to the available mains

supply voltage, and the mains electric

wiring should be capable of handling the

appliance’s power rating (also indicated

on the identification plate).

• During installation, please ensure

that isolated cables are used. An

incorrect connection could damage

your appliance. If the mains cable is

damaged and needs to be replaced this

should be done by a qualified person.

• Do not use adaptors, multiple sockets

and/or extension leads.

• The supply cord should be kept away

from hot parts of the appliance and must

not be bent or compressed. Otherwise

the cord may be damaged, causing a

short circuit.

• If the appliance is not connected

to the mains with a plug, a all-pole

disconnector switch (with at least 3 mm

contact spacing) must be used in order

to meet the safety regulations.

• The appliance is designed for a power

supply of 220-240V ~ and 380-415V

3N~. If your supply is different, contact

the authorised service person or a

qualified electrician.

• The power cable (H05VV-F) must be

long enough to be connected to the

appliance, even if the appliance stands

on the front of its cabinet.

• Ensure all connections are adequately

tightened.

• Fix the supply cable in the cable clamp

and then close the cover.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Techwood EHA Basic XA3 1 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 9,98 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Techwood EHA Basic XA3 1 Manual

Product: