486777
4
Zoom out
Zoom in
Previous page
1/13
Next page
BROADBAND INTERNET ROUTER – USER’S MANUAL
- Page 4 of 13 -
C. Reset Button
While you forget the password to login the utility or want to re-configure it, press the
button to restore the factory default configuration. Press the button during 1~5seconds,
system will just restart. Press the button more than 5 seconds, system will restore
default config (default IP is 192.168.1.1)
D.
Hardware
4 LAN Ports
For linking computers or other Ethernet devices, e.g. a hub/switch
WAN Port
For linking to the Ethernet port of a cable/DSL modem
Power (3.3V/3A)
Used to connect the external power adapter supplied with the router. Note that
only the supplied adapter should be used.
Hardware Installation
Making a Connection
1. Connect to a cable/DSL modem -- Use a standard Ethernet RJ-45 cable
(Cross over).
Check the “Link/Act” LED of “WAN” port on front panel, it must be on.
2. Connect to the PCs – use a standard Ethernet RJ-45 Cable.
3. Connect the power adapter.
Attention:
1. The cable distance between the IP Sharing Router and PC/hub/Switch
should not exceed 100 meters.
2. Make sure the wiring is correct. In 10Mbps operation, Category 3/4/5 cable
can be used for connection. To reliably operate your network at 100Mbps,
you must use Category 5 cable, or better Data Grade.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Techsolo TC-R10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Techsolo TC-R10 in the language / languages: English as an attachment in your email.

The manual is 1,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info