424807
12
Zoom out
Zoom in
Previous page
1/41
Next page
www.technomate.com
20 21
Your Digital Partner for Life
Goto Reference : Move the dish to the 0 position.
Antenna Longitude : Edit antenna longitude by pressing / buttons and numeric buttons.
Antenna Latitude : Edit antenna latitude by pressing / buttons and numeric buttons.
- Go To : Save the current setting of USALS System.
2. Scan : Press Red ( ) button on the remote to begin satellite search.
3. Auto Navigation : Press Green ( ) button the remote to begin auto navigation.
* Note : When you change each parameter, you need to know exact parameter of the LNB to modify L.O(local oscillator)
frequency.
- Search Type : Select the type of channel search
you want by pressing / buttons
on the remote.
All : To search all the Free To Air and scrambled
channels, TV & Radio channels.
Free : To search Free To Air channels only.
TV : To search TV channels only.
- Network Search : Select Network Search ON/OFF
to find more transponders
through NIT Search.
- Scan : Begin channel search of the selected satellite.
5. Auto Navigation : Press Red ( ) button on the remote.
6. Auto Navigation Blind Search : Press Green( ) button on the remote and then
begin Blind Search of the selected satellite.
* Note : Make sure that the signal level of the selected satellites is high by the signal quality bar. If the signal quality is lower
than 50%, go gack to satellite Setup and check LNB DiSEqC Switching, ect.
1. Select DiSEqC 1.2 or USALS in the Motorized
Setting menu.
2. In the viewing mode, Press POS button on
the remote to display DiSEqC Motor View
Control.
3. Press / buttons on the remote to move
DiSEqC Motor to get the best singal.
DiSEqC Motor View Control
All the available channels/satellites can be
searched in this menu. Select the satellite and
save before Auto Search.
1. Press the MENU button on the remote to
display the main menu.
2. Use the / and / buttons to move in
the menu.
3. Select Auto Navigation, Auto Navigation
menu will appear.
4. Select the satellites you want to search by pressing the OK button on the remote.
You can select more satellites by pressing the / buttons and OK button on the
remote.
Auto Navigation
1. Select the satellites you want to search by
pressing the button on the remote.
2. For Polarization, choose from ALL, V or H. For
Scan Mode choose either Fast or Detail.
3. Press the OK button to start scanning.
4. Auto Navigation Blind Search : Press
Red( )button on the remote and then
begin Blind Search of all ‘selected’ satellite.
Blind Search
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Technomate tm 6800 hd at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Technomate tm 6800 hd in the language / languages: English, French as an attachment in your email.

The manual is 2,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info