424754
17
Zoom out
Zoom in
Previous page
1/32
Next page
Pagina 17 van 32
Gemotoriseerde instelling DiSEqC 1.2 Set-up
1. Alvorens de motor in te stellen dient u de instructies in de satelliet set-up sectie van vorige pagina te
volgen (enkel stappen 1-3).
5. Ga naar DiSEqC Motor en selecteer vervolgens DiSEqC 1.2 met behulp van de / toetsen van de
afstandsbediening .
a) Ga naar BEWEEG (move) en beweeg de schotelpositie naar west/oost d.m.v. de / toetsen.
b) Voor de fijn afstemming van het signaal ga naar fijn afstemmen om de schotelpositie stap voor stap naar
west/oost te bewegen met behulp van de / toetsen.
7. Ga naar commando type om een positie te bewaren.
a) Gebruik de / toetsen om naar de bewaren positie te gaan en druk op de OK toets om te bewaren.
8. Ga naar commando type om de schotel/antenne naar de 0° positie te brengen.
a) Gebruik de / toetsen om naar ga naar referentie te gaan en druk op de OK toets om de schotel/antenne
naar 0° te bewegen.
9. Om naar de vorige bewaarde positie te gaan selecteert u de satelliet via satelliet en gaat u vervolgens naar
commando type.
a) Gebruik de / toetsen om naar de ga naar positie te gaan en druk op de OK toets om de schotel/antenne
naar de bewaarde positie te bewegen.
10. Om de satelliet te zoeken, druk op de rode toets van de afstandsbediening.
2. Na het uitvoeren van stappen 1-3 drukt u op de EXIT toets van de
afstandsbediening om terug te keren naar het hoofdmenu.
3. Ga naar gemotoriseerde instelling” en druk op OK.
4. Selecteer een satelliet met behulp van de / toetsen of druk op de
OK toets om de satellietenlijst te openen. Druk op de OK toets om een
satelliet keuze te bevestigen als u de satellietenlijst geopend hebt.
6. Om een limiet in te stellen gaat u naar motor controle en drukt u
vervolgens op de OK toets van de afstandsbediening.
a) Pas de stap grootte (step size) aan indien vereist.
b) Ga naar stappen bewegen (move steps) om de motor te
bewegen.
c) Ga naar limiet instellen (limit set) en kies uit: Oost limiet,
West limiet of limiet wissen.
d) Druk op de OK toets om de limiet te bevestigen.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Technomate tm 3200 d at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Technomate tm 3200 d in the language / languages: Dutch as an attachment in your email.

The manual is 1,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Technomate tm 3200 d

Technomate tm 3200 d User Manual - English - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info