20
1) Move the machine with installed heat pipe and fittings before the window, and the distance between the body
and walls or other objects shall be least 50 cm (as shown in Fig.4).
Figure4
2) Elongate the exhaust pipe and snap the flat end of the exhaust pipe joints into the hole of the window sealing
plate assembly (as shown in Fig.5 and Fig.6).
Notes：1、the flat end of the exhaust pipe joints must be snapped into place.
2、The pipe cannot be distorted nor has substantial turning (greater than 45 °). Keep the ventilation of the
exhaust pipe not blocked.
Figure 5 Figure 6
Important Notice:
The length of the exhaust hose shall be 280~1,500mm, and this length is based on the specifications of the appliance.
Do not use extension tubes or replace it with other different hoses, or this may cause a malfunction. Exhaust host
must be not blocked; otherwise it may cause overheating.
VI.Drainage Instructions
This machine has two drainage methods: manual drainage and continuous drainage.
